1/4 light vent seals
- spares
- Posts: 81
- Joined: Sat Dec 06, 2003 4:26 pm
- Club Member: Yes
- Car Model: Californian, Mirage, K9
- Location: Warrington, UK
- Has thanked: 1 time
- Been thanked: 47 times
- Contact:
1/4 light vent seals
Imp Club Spares item 7204194/5 -- 1/4 light vent seal saloon and coupe, new remade (pair) to order £80.00 plus £3.00 postage. These are specially made for The Imp Club in Australia, so prices may fluctuate with the exchange rate. I currently have a small number in stock - contact Bob Allan (details inside front cover of Impressions). We also have steering rack centre gaiters from the same source and 7" fluffy headlamp seals are on order together with other desireable rubber items (enquire for details).
You do not have the required permissions to view the files attached to this post.
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
- 617sqn
- Posts: 1146
- Joined: Fri Dec 05, 2003 11:17 pm
- Club Member: Yes
- Car Model: Hillman Imp 1972
- Location: Sussex, England.
Re: 1/4 light vent seals
I'm in the market for, say, two pairs of 7" headlamp to body seals
Cheers, Andy G.
Cheers, Andy G.
Member No. 7500, and Stan's best mate.
- ImpManiac
- Posts: 1855
- Joined: Tue Feb 01, 2005 3:48 pm
- Club Member: Yes
- Car Model: Singer Chamois
- Location: Houghton Regis, Bedfordshire
- Has thanked: 184 times
- Been thanked: 13 times
Re: 1/4 light vent seals
^^ Me too.
IM
IM
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
-
- Posts: 56
- Joined: Mon Jun 13, 2005 6:28 pm
- Club Member: No
- Car Model: 72 Imp Super
- Location: Northampton
- Contact:
Re: 1/4 light vent seals
Me too
Chris
Chris
Eric blue super - Off road for new engine (again) and restoration
Yellow late super - Patiently waiting for it's mot
Yellow late super - Patiently waiting for it's mot
-
- Posts: 13
- Joined: Tue Jun 26, 2007 12:23 am
- Club Member: Yes
- Location: dewsbury, west yorkshire
- spares
- Posts: 81
- Joined: Sat Dec 06, 2003 4:26 pm
- Club Member: Yes
- Car Model: Californian, Mirage, K9
- Location: Warrington, UK
- Has thanked: 1 time
- Been thanked: 47 times
- Contact:
Re: 1/4 light vent seals
7" headlamp seals are now in stock. For anyone wanting to order a pair, please send me £25.00 which will also cover postage. Don't forget to include your address for delivery.
Cheers - Bob
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
- Basildon310
- Posts: 70
- Joined: Mon Aug 08, 2005 10:50 am
- Club Member: No
- Car Model: Singer Chamois Coupe
- Location: Shoreham-by-Sea
Re: 1/4 light vent seals
/\ Mine arrived last week and they are REALLY good!!!!
Cheers Bob!
Ben
Cheers Bob!
Ben
Prepare to be shocked by the Slamois!
1967 Singer Chamois Coupe F1 , 1968 Bond 875 Ranger Van
1967 Singer Chamois Coupe F1 , 1968 Bond 875 Ranger Van
-
- Posts: 11
- Joined: Tue Jun 10, 2008 4:44 pm
- Club Member: No
- Car Model: '68 Californian. 930 Cashmore Twin SU's
- Location: West Yorks
Re: 1/4 light vent seals
Have emailed to ask when is the best time to phone to place an order, but no reply as yet to email or phone calls.
Cheers
Ian
Cheers
Ian
- 617sqn
- Posts: 1146
- Joined: Fri Dec 05, 2003 11:17 pm
- Club Member: Yes
- Car Model: Hillman Imp 1972
- Location: Sussex, England.
Re: 1/4 light vent seals
Woohoo !! Got mine ready for the finishing off after repairs. They look fab (and far superior to the originals), and if they do the job as well as they look, then no more water ingress through the lights . baring jet washes of course . And very speedily despatched, may I add.
Andy G.
Andy G.
Member No. 7500, and Stan's best mate.
- Keith 'Supaimpy' Laming
- Posts: 147
- Joined: Tue Sep 09, 2003 11:07 am
- Club Member: Yes
- Car Model: Imps and Clans
- Location: Proboards
- Contact:
Re: 1/4 light vent seals
the clue on where to order is the signature on the first post, contact Bob, details in Impressions
Keith
Dorset ACO
Dorset ACO
- spares
- Posts: 81
- Joined: Sat Dec 06, 2003 4:26 pm
- Club Member: Yes
- Car Model: Californian, Mirage, K9
- Location: Warrington, UK
- Has thanked: 1 time
- Been thanked: 47 times
- Contact:
Re: 1/4 light vent seals
Yes, I've still got some in stock. Please e-mail me at "spares@theimpclub.co.uk" not via the forum please.
Once these are sold out there will not be any more!
Note I also have the 7" headlamp seals in stock too and other rubber seal items.
Bob
Once these are sold out there will not be any more!
Note I also have the 7" headlamp seals in stock too and other rubber seal items.
Bob
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
-
- Posts: 305
- Joined: Tue Jan 20, 2004 8:16 pm
- Club Member: Yes
- Car Model: Imps
- Location: Bristol. Somerset.
- Contact:
Re: 1/4 light vent seals
You will need a scalpel type blade to open up hinge hole. They fit very well. They are still available, but direct from Frank Schoenberger.
Drew Aitchison. Messing about in Imps since 1967!
- 617sqn
- Posts: 1146
- Joined: Fri Dec 05, 2003 11:17 pm
- Club Member: Yes
- Car Model: Hillman Imp 1972
- Location: Sussex, England.
Re: 1/4 light vent seals
I've received a note from Bob at club spares to say that they currently have no stock. They are apparently going to be reordered at some stage in the future. In the light of this news I guess it would be prudent to seek them in the antipodes.
Andy G.
Andy G.
Member No. 7500, and Stan's best mate.
- 67cali
- Posts: 103
- Joined: Tue Feb 17, 2004 2:27 am
- Club Member: Yes
- Car Model: Hillman Imp Van 1969 (G)
- Location: Surrey
Re: 1/4 light vent seals
I just wish the quarter light seals were available for the non opening quarter lights as fitted to vans and basic imps. The seal is different.
Meerkat Pete
-
- Posts: 305
- Joined: Tue Jan 20, 2004 8:16 pm
- Club Member: Yes
- Car Model: Imps
- Location: Bristol. Somerset.
- Contact:
Re: 1/4 light vent seals
Sorry my fault, I meant the wee metal bit that pokes through for the chrome handle to lock onto.kevin2306 wrote:Is that the bottom hinge?
Drew Aitchison. Messing about in Imps since 1967!
- spares
- Posts: 81
- Joined: Sat Dec 06, 2003 4:26 pm
- Club Member: Yes
- Car Model: Californian, Mirage, K9
- Location: Warrington, UK
- Has thanked: 1 time
- Been thanked: 47 times
- Contact:
Re: 1/4 light vent seals
For anyone interested I have one set left in stock. It was ordered but never paid for. I really hate that!
Contact me on <spares@theimpclub.co.uk>
Contact me on <spares@theimpclub.co.uk>
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
-
- Posts: 6
- Joined: Sun Feb 29, 2004 12:17 am
- Club Member: Yes
- Car Model: stiletto / sunbeam sport / 3 x mk1 / mk2
- Location: selby
Re: 1/4 light vent seals
Frank is now considering producing coupe seals and is looking to see if there is suitable interest to have them made as a new mould will have to be made which is quite costly, so looking for a level.of interest, as he has not had any response to support to get them made, I have supplied a set of coupe frames to be able to manufacture a perfect fit
- Lars Hagermark
- Posts: 327
- Joined: Mon Apr 03, 2006 10:47 pm
- Club Member: No
- Car Model: .
- Location: Sweden
Re: 1/4 light vent seals
I've put my name on Franks' Facebook "order list". Hope he'll have enough pre-orders to start making them soon.imp-racer wrote:Frank is now considering producing coupe seals and is looking to see if there is suitable interest to have them made as a new mould will.have to be made which is wuite costly so looking for a level.of interest, as he has not had any response to support to get them made, I have supplied a set of coupe frames to be able to manufacture a perfect fit
-
- Posts: 6
- Joined: Sun Feb 29, 2004 12:17 am
- Club Member: Yes
- Car Model: stiletto / sunbeam sport / 3 x mk1 / mk2
- Location: selby
-
- Posts: 14
- Joined: Sat Apr 04, 2009 12:04 am
- Club Member: Yes
- Car Model: sunbeam sport
- spares
- Posts: 81
- Joined: Sat Dec 06, 2003 4:26 pm
- Club Member: Yes
- Car Model: Californian, Mirage, K9
- Location: Warrington, UK
- Has thanked: 1 time
- Been thanked: 47 times
- Contact:
Re: 1/4 light vent seals
Sorry these are no longer available from Imp Club Spares.
Please contact Roger for info.
Please contact Roger for info.
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk