1/4 light vent seals

Club Spares Info - parts lists and contacts in this forum

Moderator: spares

Post Reply
User avatar
spares
Posts: 105
Joined: Sat Dec 06, 2003 4:26 pm
Club Member: Yes
Car Model: Califormian, Mirage, K9
Location: Warrington, UK
Contact:

1/4 light vent seals

Post by spares » Sat Jun 07, 2008 6:47 am

Imp Club Spares item 7204194/5 -- 1/4 light vent seal saloon and coupe, new remade (pair) to order £80.00 plus £3.00 postage. These are specially made for The Imp Club in Australia, so prices may fluctuate with the exchange rate. I currently have a small number in stock - contact Bob Allan (details inside front cover of Impressions). We also have steering rack centre gaiters from the same source and 7" fluffy headlamp seals are on order together with other desireable rubber items (enquire for details).
Attachments
lh_vent_seal.jpg
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
User avatar
617sqn
Posts: 4445
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: 1/4 light vent seals

Post by 617sqn » Sat Jun 07, 2008 4:27 pm

I'm in the market for, say, two pairs of 7" headlamp to body seals :)

Cheers, Andy G.
Member No. 7500, and proud of it !
User avatar
ImpManiac
Posts: 9297
Joined: Tue Feb 01, 2005 3:48 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Houghton Regis, Bedfordshire

Re: 1/4 light vent seals

Post by ImpManiac » Sat Jun 07, 2008 4:35 pm

^^ Me too. :D

IM 8)
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
User avatar
cbcen
Posts: 475
Joined: Mon Jun 13, 2005 5:28 pm
Club Member: Yes
Car Model: 72 Imp Super
Location: Northampton
Contact:

Re: 1/4 light vent seals

Post by cbcen » Sat Jun 07, 2008 11:49 pm

Me too 8)

Chris
Eric blue super - Off road for new engine (again) and restoration
Yellow late super - Patiently waiting for it's mot
User avatar
deanyboy
Posts: 278
Joined: Mon Jun 25, 2007 11:23 pm
Club Member: Yes
Location: dewsbury, west yorkshire

Re: 1/4 light vent seals

Post by deanyboy » Fri Jun 27, 2008 4:37 pm

And mee too! :mrgreen:

Dean
1971 Hillman Super Imp
?? Something Else ??
User avatar
spares
Posts: 105
Joined: Sat Dec 06, 2003 4:26 pm
Club Member: Yes
Car Model: Califormian, Mirage, K9
Location: Warrington, UK
Contact:

Re: 1/4 light vent seals

Post by spares » Thu Oct 16, 2008 7:16 am

:D
7" headlamp seals are now in stock. For anyone wanting to order a pair, please send me £25.00 which will also cover postage. Don't forget to include your address for delivery.
Cheers - Bob
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
User avatar
Basildon310
Posts: 941
Joined: Mon Aug 08, 2005 9:50 am
Club Member: Yes
Car Model: Singer Chamois Coupe
Location: Shoreham-by-Sea

Re: 1/4 light vent seals

Post by Basildon310 » Thu Oct 16, 2008 7:56 am

/\ Mine arrived last week and they are REALLY good!!!! :D :D :D

Cheers Bob!

Ben
Prepare to be shocked by the Slamois!

1967 Singer Chamois Coupe F1 ;-), 1968 Bond 875 Ranger Van
User avatar
TVRTasmin
Posts: 163
Joined: Tue Jun 10, 2008 3:44 pm
Club Member: Yes
Car Model: '68 Californian. 930 Cashmore Twin SU's
Location: West Yorks

Re: 1/4 light vent seals

Post by TVRTasmin » Thu Oct 16, 2008 3:52 pm

Have emailed to ask when is the best time to phone to place an order, but no reply as yet to email or phone calls. :wink:

Cheers
Ian
User avatar
617sqn
Posts: 4445
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: 1/4 light vent seals

Post by 617sqn » Sat Oct 25, 2008 6:16 pm

Woohoo !! Got mine ready for the finishing off after repairs. They look fab (and far superior to the originals), and if they do the job as well as they look, then no more water ingress through the lights :D . baring jet washes of course :( . And very speedily despatched, may I add.

Andy G.
Member No. 7500, and proud of it !
User avatar
billsher
Posts: 38
Joined: Wed Nov 19, 2008 7:45 pm
Club Member: Yes
Car Model: singer chamois coupe

Re: 1/4 light vent seals

Post by billsher » Thu Feb 12, 2009 6:24 pm

How do I order these 1/4 light vent seals :?: :?:
Last edited by billsher on Thu Feb 12, 2009 6:28 pm, edited 1 time in total.
User avatar
Keith 'Supaimpy' Laming
Posts: 724
Joined: Tue Sep 09, 2003 10:07 am
Club Member: Yes
Car Model: Imps and Clans
Location: Proboards
Contact:

Re: 1/4 light vent seals

Post by Keith 'Supaimpy' Laming » Thu Feb 12, 2009 6:27 pm

the clue on where to order is the signature on the first post, contact Bob, details in Impressions
Keith
Dorset ACO
User avatar
spares
Posts: 105
Joined: Sat Dec 06, 2003 4:26 pm
Club Member: Yes
Car Model: Califormian, Mirage, K9
Location: Warrington, UK
Contact:

Re: 1/4 light vent seals

Post by spares » Sat Mar 07, 2009 5:28 pm

Yes, I've still got some in stock. Please e-mail me at "spares@theimpclub.co.uk" not via the forum please.

Once these are sold out there will not be any more!

Note I also have the 7" headlamp seals in stock too and other rubber seal items.

Bob
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
User avatar
kevin2306
Posts: 2
Joined: Sun Mar 09, 2014 11:04 am
Club Member: No
Car Model: vogue

Re: 1/4 light vent seals

Post by kevin2306 » Mon Mar 10, 2014 6:43 pm

Good evening

Just a quick question if any1 has fitted the 1/4 light seals? Are they a decent enough fit or do they need fettling to provide a good seal

Many thanks
User avatar
kilty
Posts: 1907
Joined: Tue Jan 20, 2004 8:16 pm
Club Member: Yes
Car Model: Imps
Location: Bristol. Somerset.
Contact:

Re: 1/4 light vent seals

Post by kilty » Tue Mar 11, 2014 8:40 am

You will need a scalpel type blade to open up hinge hole. They fit very well. They are still available, but direct from Frank Schoenberger.
Drew Aitchison. Messing about in Imps since 1967!
User avatar
kevin2306
Posts: 2
Joined: Sun Mar 09, 2014 11:04 am
Club Member: No
Car Model: vogue

Re: 1/4 light vent seals

Post by kevin2306 » Tue Mar 11, 2014 6:16 pm

Is that the bottom hinge?
User avatar
617sqn
Posts: 4445
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: 1/4 light vent seals

Post by 617sqn » Tue Mar 11, 2014 6:52 pm

I've received a note from Bob at club spares to say that they currently have no stock. They are apparently going to be reordered at some stage in the future. In the light of this news I guess it would be prudent to seek them in the antipodes.

Andy G.Image
Member No. 7500, and proud of it !
User avatar
67cali
Posts: 1034
Joined: Tue Feb 17, 2004 2:27 am
Club Member: Yes
Car Model: Hillman Imp Van 1969 (G)
Location: Surrey

Re: 1/4 light vent seals

Post by 67cali » Tue Mar 11, 2014 10:23 pm

I just wish the quarter light seals were available for the non opening quarter lights as fitted to vans and basic imps. The seal is different.
Meerkat Pete
User avatar
kilty
Posts: 1907
Joined: Tue Jan 20, 2004 8:16 pm
Club Member: Yes
Car Model: Imps
Location: Bristol. Somerset.
Contact:

Re: 1/4 light vent seals

Post by kilty » Mon Apr 28, 2014 12:28 pm

kevin2306 wrote:Is that the bottom hinge?
Sorry my fault, I meant the wee metal bit that pokes through for the chrome handle to lock onto. :shock:
Drew Aitchison. Messing about in Imps since 1967!
User avatar
spares
Posts: 105
Joined: Sat Dec 06, 2003 4:26 pm
Club Member: Yes
Car Model: Califormian, Mirage, K9
Location: Warrington, UK
Contact:

Re: 1/4 light vent seals

Post by spares » Tue Jun 03, 2014 5:54 pm

For anyone interested I have one set left in stock. It was ordered but never paid for. I really hate that!
Contact me on <spares@theimpclub.co.uk>
Sincerely, Bob (Imp Club Spares)
Contact me for any Imp and related spares requirements or technical advice.
E-mail: spares@theimpclub.co.uk
imp-racer
Posts: 23
Joined: Sun Feb 29, 2004 12:17 am
Club Member: Yes
Car Model: stiletto / sunbeam sport / 3 x mk1 / mk2
Location: selby

Re: 1/4 light vent seals

Post by imp-racer » Sat Nov 26, 2016 1:06 pm

Frank is now considering producing coupe seals and is looking to see if there is suitable interest to have them made as a new mould will have to be made which is quite costly, so looking for a level.of interest, as he has not had any response to support to get them made, I have supplied a set of coupe frames to be able to manufacture a perfect fit
Last edited by imp-racer on Sat Nov 26, 2016 5:57 pm, edited 1 time in total.
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: 1/4 light vent seals

Post by Lars Hagermark » Sat Nov 26, 2016 3:28 pm

imp-racer wrote:Frank is now considering producing coupe seals and is looking to see if there is suitable interest to have them made as a new mould will.have to be made which is wuite costly so looking for a level.of interest, as he has not had any response to support to get them made, I have supplied a set of coupe frames to be able to manufacture a perfect fit
I've put my name on Franks' Facebook "order list". Hope he'll have enough pre-orders to start making them soon.
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
imp-racer
Posts: 23
Joined: Sun Feb 29, 2004 12:17 am
Club Member: Yes
Car Model: stiletto / sunbeam sport / 3 x mk1 / mk2
Location: selby

Re: 1/4 light vent seals

Post by imp-racer » Sat Nov 26, 2016 5:55 pm

thanks Lars see how it goes needs more support
allthingscars
Posts: 72
Joined: Fri Apr 03, 2009 11:04 pm
Club Member: Yes
Car Model: sunbeam sport

Re: 1/4 light vent seals

Post by allthingscars » Sun Nov 27, 2016 11:57 am

I have put my name on the facebook page
Kev
bks974c
Posts: 2566
Joined: Thu Aug 19, 2004 4:26 pm
Club Member: Yes
Car Model: all the above
Location: Edinburgh, Scotland

Re: 1/4 light vent seals

Post by bks974c » Sun Nov 27, 2016 5:42 pm

I'd be interested in a set for the coupe, not posted on facebook.

Scott
Post Reply