Nods news , Sometimes its the little things .

Show off and tells us about your car, finished or a work in progress

Moderator: Keith 'Supaimpy' Laming

The Nun
Posts: 7316
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods News , Washer bottle moved .

Post by The Nun » Tue Jun 06, 2017 12:50 pm

I can see a 12v tea heater being fitted in the bottle then :wink:
But these days you have to run with quite a concentrate in the wash so that the bumper headlamp wash doesn't freeze up which ruins the nozzles so as long as you use the same mix here I doubt it would be a problem, also if the garaged overnight helps a little.
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved .

Post by Dave ' Linwood ' Lane » Tue Jun 06, 2017 3:36 pm

RoyBlunt wrote:Mmmm.....interesting.

I must admit that, in the days when she lived outside and got used regularly in deepest winter, I always moved Suzy's washer bag from its normal position (lying on the n/s wheel arch where it never gets any warmth and, if it freezes, stays frozen) to behind the millboard (?) petrol tank cover, sitting on the heater hose (where it gets warm). It was a very practical solution to a near permanently frozen washer bag. These days we use screen wash with antifreeze (and the winters don't seem as cold anyway) so I don't suppose it matters any longer but Dave's new wash bottle is going to get, and stay, very cold in winter! Looks good though....

Roy Imp011
It will but i run screenwash in it all year - water to the jets is heated anyway ( comes out at around 40 - 50 ˚C ) so as long as the bottle doesnt freeze it wont come out frozen thats for sure :)
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved .

Post by Dave ' Linwood ' Lane » Wed Jun 07, 2017 6:20 pm

Now I know it works well ive added an old brass one way valve to the washer bottle intake so it now has two valves in total , water cant drain back anywhere so the pump is always primed and theres now water trapped right up to the jets .
Squirt is instant , powerful and when the engines at running temp around 40˚C :)

Just waiting on the part I need to finish the lid off now
Attachments
18839149_10213433577293524_7865955714811065092_n.jpg
18881967_10213433577773536_1989030064560380224_n.jpg
18922067_10213433578093544_7303396113941645266_n.jpg
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Washer bottle moved .

Post by Lars Hagermark » Wed Jun 07, 2017 7:02 pm

Note 1 to self: To get the Cali ready RESIST! RESIST! RESIST!
Note 2 to self: Good to have something to occupy me during the winter.
The one-way valve idea is superb. :D
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved .

Post by Dave ' Linwood ' Lane » Thu Jun 08, 2017 4:40 pm

Bit needed to modify the ex brake / clutch cylinder reservoir lid into its new job of screen washer has arrived and been fitted .
Ive added period Girling reservoir stickers to the brake and clutch ones as well .
Attachments
19030413_10213442468595801_5574029585993901959_n.jpg
18920395_10213442469155815_8627366711280565376_n.jpg
18920187_10213442469435822_8151887571328266374_n.jpg
Formally known as " Noddy "
User avatar
bazzateer
Posts: 8329
Joined: Sun Apr 02, 2006 11:27 am
Club Member: Yes
Car Model: 68 Chamois Sport, 72 Imp Sport, 67 Vogue, 69 Vogue
Location: Watford and very occasionally Fareham

Re: Nods News , Washer bottle moved - Lid now modded .

Post by bazzateer » Thu Jun 08, 2017 6:47 pm

Clever boy! :)
If I told you I was a pathological liar, would you believe me?
Barry Blackmore - Chiltern ACO, apparently.......................
User avatar
colimp66
Posts: 1024
Joined: Wed Dec 17, 2008 8:17 pm
Club Member: Yes
Car Model: 1970 Hillman Imp Deluxe.. "The Pest"
Location: Dunbar, East Lothian, Scotland

Re: Nods News , Washer bottle moved - Lid now modded .

Post by colimp66 » Thu Jun 08, 2017 9:20 pm

Looking good :wink:
Col.
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Lars Hagermark » Thu Jun 08, 2017 9:41 pm

Oh so very good!
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Dave ' Linwood ' Lane » Fri Jun 09, 2017 2:19 pm

Thanks all for the kind comments - its quite on here nowadays so any comments good or bad are a bonus :D
Formally known as " Noddy "
The Nun
Posts: 7316
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods News , Washer bottle moved - Lid now modded .

Post by The Nun » Fri Jun 09, 2017 2:44 pm

It's the system, probably loads of folk look but can't acknowledge the fact unless they comment, which not everyone likes too, no like button, been said before would give a better idea of how interested a topic is, we can only guess as it stands.
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Dave ' Linwood ' Lane » Fri Jun 09, 2017 3:22 pm

Theres no reason we cant have a " like " button , Retrorides has one and its a proboards one like this I believe although it seems a hell of a lot better
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Lars Hagermark » Fri Jun 09, 2017 9:20 pm

The Nun wrote:It's the system, probably loads of folk look but can't acknowledge the fact unless they comment, which not everyone likes too, no like button, been said before would give a better idea of how interested a topic is, we can only guess as it stands.
I agree... somewhat.
However, the smilies are only three clicks away. Click "POSTREPLY", click a smiley of choice, click "Submit".
Perhaps a "thumbs up" smiley is a remedy?
And a click here is probably not stored somewhere in "the cloud" to be sold and used later on for targeted advertising.
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
AnonymousUser
Posts: 1515
Joined: Thu Apr 07, 2016 2:17 pm
Club Member: Yes
Car Model: Hillman

Re: Nods News , Washer bottle moved - Lid now modded .

Post by AnonymousUser » Fri Jun 09, 2017 9:50 pm

...
Last edited by AnonymousUser on Mon Sep 10, 2018 4:10 pm, edited 1 time in total.
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Dave ' Linwood ' Lane » Sun Jun 11, 2017 6:36 pm

Just to prove once and for all the following pics show that the bog brush cooler actually does work rather well , this is after a 25 mile run and being turned off for 5 minutes .
Info as to whats what with the pics :)
Attachments
19029666_10213472338062519_2615701562990638675_n.jpg
Oil cooler temp ( coming in )
19029582_10213472339022543_5828744082272571008_n.jpg
Oil cooler temp ( going out )
19030200_10213472339982567_6904039846530477303_n.jpg
Rad top temp
18952989_10213472340582582_6802067404458734442_n.jpg
Expansion bottle level sits level with the top of the mounting bracket so rise when hot is an inch
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Bog brush cooler.

Post by Lars Hagermark » Sun Jun 11, 2017 6:45 pm

:D
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
AnonymousUser
Posts: 1515
Joined: Thu Apr 07, 2016 2:17 pm
Club Member: Yes
Car Model: Hillman

Re: Nods News , Bog brush cooler.

Post by AnonymousUser » Sun Jun 11, 2017 9:35 pm

...
Last edited by AnonymousUser on Mon Sep 10, 2018 4:11 pm, edited 1 time in total.
User avatar
617sqn
Posts: 4523
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods News , Bog brush cooler.

Post by 617sqn » Mon Jun 12, 2017 8:03 am

Approve.

(Couldn't bring myself to type "like" :lol: )

Andy G
Member No. 7500, and Stan's best mate.
User avatar
ImpManiac
Posts: 9311
Joined: Tue Feb 01, 2005 3:48 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Houghton Regis, Bedfordshire

Re: Nods News , Bog brush cooler.

Post by ImpManiac » Mon Jun 12, 2017 1:33 pm

Proper job, Dave! :D

IM 8)
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
User avatar
Grahame59
Posts: 1647
Joined: Sat Aug 14, 2004 11:42 am
Club Member: Yes
Car Model: Hillman Imp Super
Location: Billingshurst, West Sussex
Contact:

Re: Nods News , Washer bottle moved - Lid now modded .

Post by Grahame59 » Tue Jun 13, 2017 6:25 am

Dave ' Linwood ' Lane wrote:Just to prove once and for all the following pics show that the bog brush cooler actually does work rather well , this is after a 25 mile run and being turned off for 5 minutes .
Info as to whats what with the pics :)
I agree. The 'bog brush' cooler has come in for more than its fair share of stick over the years but I've always found it works really well. Your heat gun test proves it, 20°C loss between entry and exit is very impressive.

Fitting an oil cooler, even to a standard Imp, seems a no brainer to me (unless original appearance is important of course). And, while not essential, a vented Sport lid increases the benefit further as it allows a wash of cool air over the oil cooler.

Imp011
Grahame Pearson
Member No. 23
Editor, Impressions

1967 Imp Super
(0-60 like a Porsche, only slower)
User avatar
African Imp
Posts: 11556
Joined: Sat Apr 06, 2013 8:09 am
Club Member: Yes
Car Model: Hillman Californian, built 3rd February 1967
Location: Hout Bay near Cape Town, South Africa.
Contact:

Re: Nods News , Bog brush cooler.

Post by African Imp » Wed Jun 14, 2017 2:25 pm

Noddy did us a favour with that in and out heat test, as did InfraZA when he got is rebuilt 1971 Imp from me.
The engine was converted to a 998cc size, same Rootes oil cooler and very similar reduction in oil temperature also :) Imp003
Attachments
!cid_912.jpg
User avatar
John Simister
Posts: 544
Joined: Sun Apr 09, 2006 8:16 am
Club Member: Yes
Car Model: Sunbeam Stiletto 1968
Location: Berkhamsted, Herts

Re: Nods News , Bog brush cooler.

Post by John Simister » Wed Jun 14, 2017 4:46 pm

Imp one, modern box nil by the look of that picture.
Member number 6. First Imp bought in 1972, 10 more between then and 2019. Currently Impless.
The Nun
Posts: 7316
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods News , Bog brush cooler.

Post by The Nun » Wed Jun 14, 2017 5:24 pm

I wonder if the standard cooler was sited outside the engine compartment or where forced air passes over it whether it would be comparable to the normal radiator type cooler?
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Bog brush cooler.

Post by Dave ' Linwood ' Lane » Wed Jun 14, 2017 6:40 pm

Years ago I recovered the engine lid sound proofing in flame proof canvas as per factory and remade the original frame that holds it in with copper wire.
Well it kept slipping so ive made a new redesigned frame from some shellack coated copper strips and some copper rivets , no painting , no rust plus being thin copper it bends easy which is whats required to fit it.
Well chuffed with the result :D :D
Attachments
19060116_10213503018589513_8142536813854650175_n.jpg
Under construction , the old one is above and used as a pattern
19224815_10213503019269530_6586351009852575242_n.jpg
Fits like so
19113705_10213503019829544_2575275326380532776_n.jpg
The old one - you can see the ends of the sound proofing have started to slip in this pic
Last edited by Dave ' Linwood ' Lane on Fri Jun 16, 2017 1:37 pm, edited 1 time in total.
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Engine sound proofing frame redesigned

Post by Lars Hagermark » Wed Jun 14, 2017 8:13 pm

Looking good. Appears much neater with frame and canvas tailored to suit.
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
The Nun
Posts: 7316
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods News , Engine sound proofing frame redesigned

Post by The Nun » Wed Jun 14, 2017 8:46 pm

I've still got the old wire one and the black duvet, where did the hearts go? :o
Peter Nunn...ey im member 00033
Impecunious
Posts: 584
Joined: Wed Aug 27, 2008 11:32 am
Club Member: Yes
Car Model: Clan Crusader Singer Chamois Sport Audi A4 Quattro

Re: Nods News , Engine sound proofing frame redesigned

Post by Impecunious » Wed Jun 14, 2017 8:49 pm

I've got a NOS wire frame with the parts tag still on it somewhere. No idea where it came from, many years ago :roll:

Dave W.

Clan003
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Engine sound proofing frame redesigned

Post by Dave ' Linwood ' Lane » Thu Jun 15, 2017 4:30 pm

The Nun wrote:I've still got the old wire one and the black duvet, where did the hearts go? :o
stayed on the mats im afraid :lol:
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Engine sound proofing frame redesigned

Post by Dave ' Linwood ' Lane » Fri Jun 16, 2017 10:32 am

New frame looks a hell of a lot better sprayed satin black , the legs have been heat shrink to prevent scratches when being fitted or removed :)
Attachments
19225195_10213519331357322_5707677886901937509_n.jpg
19225195_10213519331357322_5707677886901937509_n.jpg (34.24 KiB) Viewed 25253 times
19260282_10213519332157342_7596391659694314516_n.jpg
19224916_10213519332477350_1150443026289902592_n.jpg
Formally known as " Noddy "
AnonymousUser
Posts: 1515
Joined: Thu Apr 07, 2016 2:17 pm
Club Member: Yes
Car Model: Hillman

Re: Nods News , Engine sound proofing frame redesigned

Post by AnonymousUser » Fri Jun 16, 2017 12:42 pm

...
Last edited by AnonymousUser on Mon Sep 10, 2018 4:17 pm, edited 1 time in total.
User avatar
ImpManiac
Posts: 9311
Joined: Tue Feb 01, 2005 3:48 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Houghton Regis, Bedfordshire

Re: Nods News , Engine sound proofing frame , now painted

Post by ImpManiac » Mon Jun 19, 2017 3:16 pm

That is another lovely touch, Dave. :D

IM 8)
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , amalgamating switch panels

Post by Dave ' Linwood ' Lane » Thu Jul 06, 2017 5:11 pm

There is a problem with adding things over many decades .
That is is can all get a bit random re. the fitting .
I recently want to fit the Ferodo tapley meter but this meant id have three small panels ( plus one with the hazards and washers fitted higher up ) scattered about the dash.
So as a trial ive amalgamated the cig lighter , fuel pump switch and light and the Tapley meter and made one long switch panel .
Il leave it like this for now and see how i feel about how it looks - everything works and its all within easy reach and visible :)
Opinions are welcome :)
Attachments
19748678_10213758452455200_5754920986936141770_n.jpg
19702543_10213758453935237_8838724000078968607_n.jpg
19756844_10213758455135267_45730569763602390_n.jpg
19748535_10213758593578728_739278590078367402_n.jpg
Formally known as " Noddy "
chris d
Posts: 756
Joined: Sun May 01, 2005 8:48 pm
Club Member: Yes
Car Model: stella sunbeam stiletto.crusty 75 sunbeam sport
Location: west yorkshire

Re: Nods News , Amalgamating switch panels

Post by chris d » Thu Jul 06, 2017 7:25 pm

very nice job dave
looks the part as well
chris d
stella sunbeam stiletto.finished and enjoying
libby 75 imp deluxe.ongoing.
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods News , Amalgamating switch panels

Post by Lars Hagermark » Thu Jul 06, 2017 7:31 pm

Nice! Looks like it was there from factory.
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
bazzateer
Posts: 8329
Joined: Sun Apr 02, 2006 11:27 am
Club Member: Yes
Car Model: 68 Chamois Sport, 72 Imp Sport, 67 Vogue, 69 Vogue
Location: Watford and very occasionally Fareham

Re: Nods News , Amalgamating switch panels

Post by bazzateer » Fri Jul 07, 2017 8:41 am

Looks like it's always been there Dave.
If I told you I was a pathological liar, would you believe me?
Barry Blackmore - Chiltern ACO, apparently.......................
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Amalgamating switch panels

Post by Dave ' Linwood ' Lane » Sun Jul 09, 2017 5:19 pm

Some kindly toe rag snapped the aerial off the Singer yesterday .
Not an easy thing to replace being as its a 60s window mounted jobby .
Still some lateral thinking , an aerial meant for a hand held scanner from Maplins - some soldering and its good to go again . :)
Attachments
19883960_10213780539767369_1298846122450229300_n.jpg
the busted top of my old one
19875342_10213780540647391_1750108098292131217_n.jpg
Mahoosive scanner aerial , i just cut it to the nearest seg that matched the original busted ones largest base one
19732046_10213780541127403_8173586417385457243_n.jpg
Unsolder the busted top leaves you with this
19732215_10213780542807445_8272544175724984108_n.jpg
soldered together
19875472_10213780544247481_4143107763316655968_n.jpg
Refit rubber sleeve ( a right pain ) and fit to mount
19884072_10213780544487487_4142694792742857830_n.jpg
fully down
19732240_10213780547207555_3369554159657797688_n.jpg
fully up
Formally known as " Noddy "
User avatar
617sqn
Posts: 4523
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods News , Some goon broke my aerial off

Post by 617sqn » Sun Jul 09, 2017 8:14 pm

Nice job, Dave. Don't let the bastards grind you down. By the way, I'd like to see some paint on that vice, please. :D

Andy G
Member No. 7500, and Stan's best mate.
User avatar
Dave ' Linwood ' Lane
Posts: 7800
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods News , Some goon broke my aerial off

Post by Dave ' Linwood ' Lane » Sun Jul 09, 2017 9:10 pm

617sqn wrote:Nice job, Dave. Don't let the bastards grind you down. By the way, I'd like to see some paint on that vice, please. :D

Andy G
i did paint it once but its all beat off now , its a mid 1940s Swindens swivel vice BTW - I do take it apart and grease it up once a year though :)
Formally known as " Noddy "
User avatar
617sqn
Posts: 4523
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods News , Some goon broke my aerial off

Post by 617sqn » Sun Jul 09, 2017 9:42 pm

Mine, bought pre used in Feb last year.

Andy G
Attachments
DSC_0056.JPG
Member No. 7500, and Stan's best mate.
chris d
Posts: 756
Joined: Sun May 01, 2005 8:48 pm
Club Member: Yes
Car Model: stella sunbeam stiletto.crusty 75 sunbeam sport
Location: west yorkshire

Re: Nods News , Some goon broke my aerial off

Post by chris d » Mon Jul 10, 2017 8:21 am

I can see a vice competion coming.
shame you didn't catch the toe-rag dave ,he could have modelled the ariel for you in different parts of his anatamony.
reseption would have been bad,but the fun factor would have been good.
is there nothing you cant fix
chin up
cheers chris d
stella sunbeam stiletto.finished and enjoying
libby 75 imp deluxe.ongoing.
User avatar
African Imp
Posts: 11556
Joined: Sat Apr 06, 2013 8:09 am
Club Member: Yes
Car Model: Hillman Californian, built 3rd February 1967
Location: Hout Bay near Cape Town, South Africa.
Contact:

Re: Nods News , Some goon broke my aerial off

Post by African Imp » Mon Jul 10, 2017 3:29 pm

Dave,

Your Vusky now has an oil smoke issue? very recently you changed the oil on both that engine and the Singers, did you change the brand and grade of oil at all?

If so from which type and grade to which type and grade, was it Valvoline? Imp027
Post Reply