Nods news , Time for reflection plus year end report .

Show off and tells us about your car, finished or a work in progress

Moderator: Keith 'Supaimpy' Laming

User avatar
BKasl
Posts: 18
Joined: Wed May 27, 2009 5:35 pm
Club Member: No
Car Model: Imp Deluxe

Re: Nods news, Bonnets back from respray , pics of the proce

Post by BKasl » Fri Aug 12, 2016 7:19 pm

The 12 " wheel you are using for a spare, is that useable with 13" wheels on the car? Wont it make a rotation difference primarily on the rear for possible damage?
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Bonnets back from respray , pics of the proce

Post by Dave ' Linwood ' Lane » Sat Aug 13, 2016 6:55 pm

BKasl wrote:The 12 " wheel you are using for a spare, is that useable with 13" wheels on the car? Wont it make a rotation difference primarily on the rear for possible damage?
Should be fine - rolling radius for a 155 / 80 / 12 matches my 185 / 60 / 13s more or less exactly - diff should be able to deal with the -1% difference
155 / 80 / 12 rolling radius is 21.76mm
185 / 60 / 13 rolling radius is 21.74mm
Difference in Diameter: percentage = -0.18% actual = -1mm
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Rear window seal - a new discovery

Post by Dave ' Linwood ' Lane » Tue Aug 16, 2016 2:22 pm

Well the factory window frame seal on the Singer has finally given up
Good news --- Ive got a NOS genuine one as a spare
Confusing news -- profile on the new one is different :?
Which must mean there were different versions of window frame seal - who knew :o :D
Anyway it had to be worth trying as the old one was leaking a tad .
New one fitted superbly and sits how i remember genuine ones fitting - ie. curled towards the frames outer face.
Window shuts fine - in fact better as ive had to adjust the catch so it closes tighter and the new seal is leak proof between it and the frame seal however the frame seal to car window aperture does leak a tiny bit under heavy hosing .
I think its Best to check this properly next time it rains as a hose is no substitute for actual rain.
Il let the pics do the talking
Attachments
13924938_10210323984355644_7642578358569265757_n.jpg
The old cracked seal - you can see how it sticks out which is different to the new one
14039978_10210324041197065_5639407027392659877_n.jpg
New seal profile on the left which is way different to tother one
13934669_10210330943049607_413551213589091164_n.jpg
How the new seal fits
14021455_10210330944129634_3420987762935502874_n.jpg
Initial leak test in progress
14064294_10210330943729624_8048092762539633111_n.jpg
Shuts OK
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Rear window frame seal- a new discovery to m

Post by Dave ' Linwood ' Lane » Tue Aug 16, 2016 2:31 pm

Close up of that new seal and how it sits
Malcolm Anderson has informed me this seal is a 63 - 65 early type :)
Attachments
14063819_10210331194735899_171528823549724309_n.jpg
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Rear window frame seal- a new discovery to m

Post by Dave ' Linwood ' Lane » Sat Aug 20, 2016 6:28 pm

This will teach me to wash the Vusky :(
I found a hole :(
Henceforth a mini weldathon starts.
Paint match is so bad it might as well be feckin red as blue. LOL .
I will call this " The why the feck did I even bother starting " job .
Attachments
14067511_10210368036936931_735126945192596294_n.jpg
A hole
14079982_10210368037136936_3003662960303393572_n.jpg
A bigger hole
14063940_10210368037936956_4082723077130095904_n.jpg
inner wing extended
13962607_10210368038176962_5918192100861723845_n.jpg
kind of fits
14021571_10210368039616998_2305923318017499478_n.jpg
Welded up - wing was made off cheese i think
14102293_10210368040217013_8002142288119495544_n.jpg
Wob added
14100338_10210368040777027_1951325018191431717_n.jpg
paint match was perfectamundo ( NOT )
Formally known as " Noddy "
User avatar
bazzateer
Posts: 8367
Joined: Sun Apr 02, 2006 11:27 am
Club Member: Yes
Car Model: 68 Chamois Sport, 72 Imp Sport, 67 Vogue, 69 Vogue
Location: Watford and very occasionally Fareham

Re: Nods news, Vusky sprouts a hole

Post by bazzateer » Sat Aug 20, 2016 9:35 pm

The paint will protect it until you give the Vusky the respray it deserves :wink:
If I told you I was a pathological liar, would you believe me?
Barry Blackmore - Chiltern ACO, apparently.......................
User avatar
ImpManiac
Posts: 9324
Joined: Tue Feb 01, 2005 3:48 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Houghton Regis, Bedfordshire

Re: Nods news, Vusky sprouts a hole

Post by ImpManiac » Sat Aug 20, 2016 10:00 pm

Well spotted, Dave. :)

IM 8)
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Vusky sprouts a hole

Post by Dave ' Linwood ' Lane » Sun Aug 21, 2016 6:04 pm

I have done a paint job on my welded in repair that Clark Dawson would ---------------------- cry over as being totally crap. :)
However needs must , paint match in my rattle can was totally wrong " but " its spot on in my old touch up tin ,
So
Brush paint a load on
Leave to dry off
Wet and dry the life out of it
T cut to get a sort of decent finish and
Voila - i give you my most bodged paint job EVA --LOL
Attachments
14035000_10210377565935150_3580070924368875015_n.jpg
The " Rattle can / wrong colour spray " job
14054229_10210377564615117_722579182235088302_n.jpg
The " brush paint / sand off / T-Cut paint job
Formally known as " Noddy "
User avatar
Lotus-e-Clan
Posts: 3639
Joined: Thu Aug 10, 2006 9:08 pm
Club Member: Yes
Car Model: 75Clan 1040BVSSH GB72 mapped ign DHLAs -Waterless!
Location: North Yorkshire

Re: Nods news, Vusky sprouts a hole

Post by Lotus-e-Clan » Sun Aug 21, 2016 6:07 pm

Not too shabby, Dave ... 8) Clan004
74 Clan Crusader 1040 Red 190 bhp/ton
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods news, Vusky sprouts a hole

Post by Lars Hagermark » Sun Aug 21, 2016 6:49 pm

Image
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Lotus-e-Clan
Posts: 3639
Joined: Thu Aug 10, 2006 9:08 pm
Club Member: Yes
Car Model: 75Clan 1040BVSSH GB72 mapped ign DHLAs -Waterless!
Location: North Yorkshire

Re: Nods news, Vusky sprouts a hole

Post by Lotus-e-Clan » Sun Aug 21, 2016 6:56 pm

I like your Avatar Lars!

Very noble and handsome...

Clan004
74 Clan Crusader 1040 Red 190 bhp/ton
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods news, Vusky sprouts a hole

Post by Lars Hagermark » Mon Aug 22, 2016 5:02 am

Thanks L-e-C.
Had the idea to change my avatar when I read:
617sqn wrote:Wouldn't it be nice if all of the ar$ebook images were seen on the Forum ? Dreaming I guess, but I live in hope.
Andy G. Image Stan
Same avatar as I have on FB. Don't think it was avatar pics Andy had in mind though. :)
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a piccy

Post by Dave ' Linwood ' Lane » Thu Aug 25, 2016 5:11 pm

Not much to report but i did get a few sunset photo,s the other night im quite chuffed with :D
Attachments
14141519_10210396858617455_5124655242257569057_n.jpg
14079699_10210415236276885_7674030832602079580_n.jpg
Sunset in Somerset
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods news, Actually no news - Just two piccys

Post by Lars Hagermark » Thu Aug 25, 2016 6:03 pm

Nice! Looks very much like Aruba sunset. Didn't see any Imps there though.
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Rust fixorage on the Singer

Post by Dave ' Linwood ' Lane » Sun Aug 28, 2016 4:13 pm

So this poxy bit of rust on the singer proved to be an arse - mainly as the things full of waxoil which = Fire .
Welding was knervwracking and slow because of this even after id shoved some damp flannels down where i was welding there was smoke and the potential for a disaster .
Consequently the welding aint pretty but it will have to do
Attachments
14089074_10210442272512774_3637338128698919953_n.jpg
flange has kind of rotted away
14191977_10210442273072788_8570523166390040693_n.jpg
chop chop
14184449_10210442273472798_3072661818535707038_n.jpg
inners very solid
14095985_10210442274952835_4505869856221171244_n.jpg
New flange welded in
14183757_10210442274992836_6800420313238396476_n.jpg
Trial fit of outer panel
14064201_10210442275232842_7739650777480320143_n.jpg
start to weld in
14192586_10210442275592851_3179300143056058361_n.jpg
Finish welding - add Wob
14063714_10210442276112864_4735357000902968936_n.jpg
seam sealed and trimmed up
14088644_10210442276592876_4993245463081113115_n.jpg
bit more done
14051765_10210442277032887_2280716470746967599_n.jpg
As it stands now - more work needed though the heartstopping stuff is done
Last edited by Dave ' Linwood ' Lane on Sun Aug 28, 2016 4:45 pm, edited 1 time in total.
Formally known as " Noddy "
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Sun Aug 28, 2016 4:38 pm

Looks quite professional, Ive seen so called garage repair specialists work not come out as good as that and youve retained the correct look and profiles too, a job well done I think.
Had the waxoyl actually gotten behind that bit, I know the inner wing and outer can touch at that point which is why it corrodes as the anti rust cannot penetrate behind?
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Yet more welding - this time the Singer

Post by Dave ' Linwood ' Lane » Sun Aug 28, 2016 4:48 pm

The Nun wrote:Looks quite professional, Ive seen so called garage repair specialists work not come out as good as that and youve retained the correct look and profiles too, a job well done I think.
Had the waxoyl actually gotten behind that bit, I know the inner wing and outer can touch at that point which is why it corrodes as the anti rust cannot penetrate behind?
That feels good coming from you - waxoil was everywhere except between the inner and outer arches between that flange - so thats where it went - still inner was solid - no rot on the outer bit either except for that flange
Formally known as " Noddy "
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Sun Aug 28, 2016 5:13 pm

Thats one problem when youve got an original car and its looks ok but whats behind around the seams you dont know and you think youve anti rusted it but of course it doesnt get right into where its most needed half the time, I found that out when I re paneled my Sport, that had been Ziebarted from new and everywhere that stuff had got too was like brand new perfect, but it never got into where the inner and outer arches touch simply because it couldnt get into there, Rootes/Chrysler seemed to put some sort of caulking between in that area which doesnt help one bit of course.
Ive rust proofed my Chamois best I can with hot waxoyl poured and sprayed in, but you always wonder if its got in all those spots, which I doubt?
Peter Nunn...ey im member 00033
oli
Posts: 592
Joined: Tue Jul 03, 2007 9:48 am
Club Member: Yes
Car Model: Hillman Imp Super Safari Beige 1972
Location: Norwich

Re: Nods news, Yet more welding - this time the Singer

Post by oli » Sun Aug 28, 2016 10:28 pm

Peter - if you want to try to get something between the arch lips where they are spot welded together - try pouring in (or very liberally spraying) lots of WD40 onto the inside of the outer wing panel so that it runs down and penetrates between the two skins.
User avatar
617sqn
Posts: 4639
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods news, Yet more welding - this time the Singer

Post by 617sqn » Mon Aug 29, 2016 1:29 pm

Well, a reasonable suggestion, except long term WD40 is merely a film, and wont prevent the sort of corrosion we are talking about here. But taking the method on board, perhaps the biker/aircraftsmans friend would be a good option ? ACF50.

http://www.acf-50.co.uk/acf-50.htm

Andy G. Image Stan
Member No. 7500, and Stan's best mate.
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Yet more welding - this time the Singer

Post by Dave ' Linwood ' Lane » Mon Aug 29, 2016 5:05 pm

A quick one coat spray of top coat on the Singers repair just to see what it looks like.
At least its all solid metal and not rust / chicken wire / bondo .
Needs more work but the basic shapes good i think - Inner part still to do but the primers just been put on so not till later in the week .
A few more days on axle stands before its done :(
Attachments
14100469_10210452492088257_8527883027764893887_n.jpg
Formally known as " Noddy "
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Mon Aug 29, 2016 5:37 pm

Dave ' Linwood ' Lane wrote:A quick one coat spray of top coat on the Singers repair just to see what it looks like.
At least its all solid metal and not rust / chicken wire / bondo .
Needs more work but the basic shapes good i think - Inner part still to do but the primers just been put on so not till later in the week .
A few more days on axle stands before its done :(
Looks a good match 8)
My friends 76 Caledonian sill was mostly found to be a Cherry Red/Leicester Mercury combo, still I suppose it could have been worse they could have used The Sun. :lol:
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Yet more welding - this time the Singer

Post by Dave ' Linwood ' Lane » Tue Aug 30, 2016 7:14 pm

The best i can do on this repair .
Ive run out of time , will , enthusiasm , paint and money .
Needs cutting back at some point .
At least its solid and not built using chicken wire , wob , epoxy resin , newspaper , papier mache and metal filings LOL :)
Attachments
14089310_10210463530364207_1059372993931989708_n.jpg
14079824_10210463530284205_311497504354157186_n.jpg
Formally known as " Noddy "
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Tue Aug 30, 2016 8:47 pm

I don't think the uniformed would know anything has been touched so that's the main thing, it looks right.
Peter Nunn...ey im member 00033
User avatar
617sqn
Posts: 4639
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods news, Yet more welding - this time the Singer

Post by 617sqn » Tue Aug 30, 2016 8:55 pm

Uniformed ? Do you mean our Baz ? :lol:

Andy G
Member No. 7500, and Stan's best mate.
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Tue Aug 30, 2016 9:02 pm

Oh heck it's those annoying predictives again changing all my worms :lol:
Peter Nunn...ey im member 00033
User avatar
617sqn
Posts: 4639
Joined: Fri Dec 05, 2003 11:17 pm
Club Member: Yes
Car Model: Hillman Imp 1972
Location: Sussex, England.

Re: Nods news, Yet more welding - this time the Singer

Post by 617sqn » Tue Aug 30, 2016 9:24 pm

:D

Andy G
Member No. 7500, and Stan's best mate.
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Yet more welding - this time the Singer

Post by The Nun » Wed Aug 31, 2016 9:29 am

oli wrote:Peter - if you want to try to get something between the arch lips where they are spot welded together - try pouring in (or very liberally spraying) lots of WD40 onto the inside of the outer wing panel so that it runs down and penetrates between the two skins.
I have put a thin rust inhibitor down in that area, but if it gets to the area only time will tell, its a bit of a guess as to whether it will or not? I suppose if the metal is still like new it stands more chance of penetrating than if the rust has already started, and on something 50 years old thats anyones guess when you cant actually see it, and I expect?? Noddy was surprised when he found his was rusting even though he too had poured in loads of rust proofer?

I know its to be best avoided at all cost wherever possible as original is best, but the fitting of new panels does come with the advantage you know whats behind and can treat and protect whats there properly whilst youre about it knowing its future proofed for many years to come?
Peter Nunn...ey im member 00033
User avatar
ImpManiac
Posts: 9324
Joined: Tue Feb 01, 2005 3:48 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Houghton Regis, Bedfordshire

Re: Nods news, Yet more welding - this time the Singer

Post by ImpManiac » Tue Sep 06, 2016 2:07 pm

617sqn wrote:Uniformed ? Do you mean our Baz ? :lol:

Andy G
He's retired from that malarky. :wink:

Great work, Dave! :D To be honest, if you did not know there had been a repair to that area, it would be very difficult to spot it. It'll be more so when you've cut the paint back a bit too because it has that 'from the gun' shine at the moment. Well done!

IM 8)
Paul Harrison
imp: a small demon : FIEND : a mischievous child : URCHIN
maniac: Raging with disordered intellect: affected with mania: MAD
Pog
Posts: 55
Joined: Sat Aug 24, 2013 3:55 pm
Club Member: Yes
Car Model: 1969 Super 'Betty'
Location: Northampton, UK

Re: Nods news, Yet more welding - this time the Singer

Post by Pog » Wed Sep 07, 2016 2:59 pm

Well it's taken me a good 2 weeks of here and there reading, but I have finally finished all 115 of your wonderful thread, Dave!

You're a true inspiration to anyone wishing to look after any car, not just an Imp. I've never come across anyone with such a broad spectrum of technical skills under their hat - electrician, welder, seamster, painter, fabricator - simply incredible.

Your cars are a credit to you. I hope that one day I can park next to you in the masterclass line!

Pog
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Yet more welding - this time the Singer

Post by Dave ' Linwood ' Lane » Wed Sep 07, 2016 4:48 pm

Pog wrote:Well it's taken me a good 2 weeks of here and there reading, but I have finally finished all 115 of your wonderful thread, Dave!

You're a true inspiration to anyone wishing to look after any car, not just an Imp. I've never come across anyone with such a broad spectrum of technical skills under their hat - electrician, welder, seamster, painter, fabricator - simply incredible.

Your cars are a credit to you. I hope that one day I can park next to you in the masterclass line!

Pog
Why thanks Pog :D , apart from the welding its all self taught - if i can do it anyone can.
Glad you enjoyed it - ive not read a lot of it for years but its great someone else has got some inspiration from it all .
I just muck about fixing whats broken and altering things as and when - its just a hobby of mine .
This year was my last year in the masterclass but your welcome to park next to me in with the others anytime you want. :)
Formally known as " Noddy "
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a photo

Post by Dave ' Linwood ' Lane » Sun Sep 11, 2016 4:50 pm

Arty shot from today - cars running rather well - touch wood etc etc etc . :)
Attachments
14264806_10210580017716318_994492050196592437_n.jpg
Formally known as " Noddy "
tiker
Posts: 932
Joined: Fri Sep 02, 2011 10:58 am
Club Member: Yes
Car Model: stiletto restoration
Location: west yorks

Re: Nods news, Just a photo

Post by tiker » Sun Sep 11, 2016 8:04 pm

Hi Dave looking at the paint repair I would think your using cellulose I was wondering because I'm still in two minds to go cellulose are 2k as cellulose is so easy to repair later?
Gary
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a photo

Post by Dave ' Linwood ' Lane » Sun Sep 11, 2016 9:23 pm

tiker wrote:Hi Dave looking at the paint repair I would think your using cellulose I was wondering because I'm still in two minds to go cellulose are 2k as cellulose is so easy to repair later?
I still prefer cely as its easier to rectify any boo boos , bonnets now 2 pack and mega shiny - too shiny for the age of the car IMHO
Formally known as " Noddy "
The Nun
Posts: 7450
Joined: Tue Jan 23, 2007 7:02 pm
Club Member: Yes
Car Model: Imp x 2
Location: South

Re: Nods news, Just a photo

Post by The Nun » Mon Sep 12, 2016 3:36 am

Mine "was" done in celly and the boo boos were still there, hence the reason for me getting it all redone in modern without the boo boos. :lol: I can see if you want the original patina look then celly gives the flatter more lived in finish. :wink:
Peter Nunn...ey im member 00033
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a photo

Post by Dave ' Linwood ' Lane » Sun Sep 18, 2016 3:44 pm

Couldnt resist this photo opportunity at Thornfalcon car show today .
Got there mega early just to park under a massive Oak tree
Bonkers mad or what :)
Attachments
14358822_10210647812451144_2496464672718194673_n.jpg
14355552_10210647812971157_4184783622808890838_n.jpg
14354954_10210647815251214_7208365202507843322_n.jpg
14364681_10210647813531171_1817823030906104589_n.jpg
Formally known as " Noddy "
User avatar
Bobbycham
Posts: 425
Joined: Fri Nov 18, 2011 8:56 pm
Club Member: Yes
Car Model: Singer Chamois
Location: Devizes

Re: Nods news, Just a photo ( with added tree )

Post by Bobbycham » Sun Sep 18, 2016 5:40 pm

Not to be done on a windy day!
Looks good Dave.
Bob
Imp005
I am the most responsible person around, if anything goes wrong ,"l am responsible"
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a photo ( with added tree )

Post by Dave ' Linwood ' Lane » Sun Sep 18, 2016 6:07 pm

Bobbycham wrote:Not to be done on a windy day!
Looks good Dave.
Bob
Imp005
Not a puff of wind today - had to go for it :) Singer looks super imposed in the last pic for some reason - rest assured its not :?
Formally known as " Noddy "
User avatar
Lars Hagermark
Posts: 1350
Joined: Mon Apr 03, 2006 9:47 pm
Club Member: Yes
Car Model: 69 Californian (998) and two 1964 Imps (projects)
Location: 25 km s.w. of Stockholm, Sweden (overseas contact).

Re: Nods news, Just a photo ( with added tree )

Post by Lars Hagermark » Sun Sep 18, 2016 6:29 pm

Dave ' Linwood ' Lane wrote:Singer looks super imposed in the last pic for some reason - rest assured its not :?
At first glance I thought so too. Nice pictures all four with the first being my favourite. :)
Overseas contact, Sweden. -69 Cali (998), 2 -64 Imps in need of "some" work.
Life is full of solutions waiting to be found.
User avatar
Dave ' Linwood ' Lane
Posts: 7840
Joined: Sat Apr 15, 2006 3:55 pm
Club Member: Yes
Car Model: ,n/a

Re: Nods news, Just a photo ( with added tree )

Post by Dave ' Linwood ' Lane » Sun Sep 18, 2016 7:08 pm

Lars Hagermark wrote:
Dave ' Linwood ' Lane wrote:Singer looks super imposed in the last pic for some reason - rest assured its not :?
At first glance I thought so too. Nice pictures all four with the first being my favourite. :)
Thanks - last pic does look strange i must say - must be the sunrise and strange lighting
Formally known as " Noddy "
Post Reply