Help / Questions and Discussion relating to electrickey!
Bosch 35 amper alternator wiring
Replies: 13
by
African Imp »
Wed Sep 06, 2023 3:20 pm
First post
Can anyone detail how to correctly connect my Bosch alternator?
I fitted it to my 1967 Hillman Imp Californian some five years back and do not have...
Last post
First rule of methodical diagnosis Roy - always check the simple things first.
Poor connections account for a quite high percentage of problems when...
13 Replies
161 Views
Last post by oli Mon Sep 25, 2023 7:17 am
starter-motor pinion removal (M35G)
Replies: 2
by
foy9999 »
Fri May 12, 2023 10:52 pm
First post
I'm in the middle of refurbishing my starter. It might actually be the car's original one as it's stamped 2 65 and my car is 1965
I know there are...
Last post
When reassembling don't use grease, use powdered graphite lock lubricant. Grease attracts dirt and dust and will eventually knacker it.
2 Replies
70 Views
Last post by bazzateer Mon May 15, 2023 11:55 pm
Alternator
Replies: 3
by
Ossiedog »
Thu Mar 30, 2023 2:04 pm
First post
Hi everyone, Just bought an imp sport and the dynamo is faulty. But before I go out and buy another dynamo, could I be directed to the alternator...
Last post
Hi everyone, Just bought an imp sport and the dynamo is faulty. But before I go out and buy another dynamo, could I be directed to the alternator...
3 Replies
103 Views
Last post by John A Ross Wed Apr 05, 2023 9:21 am
How long are coils lasting ?
Replies: 21
by
keanej »
Mon Jan 09, 2023 12:18 pm
First post
Imp had been struggling to start for the last couple of months and I'd initially put this down to the cold weather, however last week it just wasn't...
Last post
Sound advice. I recall back in the day, the chokes for fluorescent light fittings also had toxic materials inside. The guy we were working for had to...
21 Replies
207 Views
Last post by Uncle Henry Sat Jan 14, 2023 6:07 pm
Wiring Loom Route
Replies: 1
by
tomrogers7 »
Sun Jul 10, 2022 11:27 am
First post
Unfortunately I didn’t dismantle the car, but have ended up doing the renovation over a number of years, hence I have no recollection of how things...
Last post
Yes the loom runs in the sill with the heater pipe .
Temporary tape the engine conectors to make the loom as smooth and small as possible and pull...
1 Replies
63 Views
Last post by mikeyhearne Sun Jul 10, 2022 1:15 pm
Fuse Box Location Later Model
Replies: 5
by
tomrogers7 »
Fri Jul 08, 2022 11:09 pm
First post
Currently working on repair of my loom in various places which has had some bodges over the years from obviously shorted wires at some point in its...
Last post
Dave has some cracking pictures of where he has mounted his
Min is pretty much same as where Dave and Andy have mounted (not much choice of easy...
5 Replies
91 Views
Last post by John A Ross Sun Jul 10, 2022 11:38 am
Motorsport looms
Replies: 1
by
moose »
Sun Apr 10, 2022 9:54 am
First post
We are currently working on two looms for one race and one rally car. IMG_3647.JPG IMG_3652.JPG IMG_3653.JPG IMG_3654.JPG
Last post
Nice work Mike, lovely work.
1 Replies
69 Views
Last post by John A Ross Sun Apr 10, 2022 1:57 pm
Battery CUT-OFF & alternators
Replies: 18
by
Lotus-e-Clan »
Tue Oct 30, 2018 4:54 pm
First post
I guess Dave (Nods) amongst others will know the answer(s) to this one.
I've seen battery cut-off switch designs that simultaneously cut the battery...
Last post
Peter
It works as far as I can see, the only issue would be if the relay fails you wouldn't be able to kill the engine.
The normal way means you...
18 Replies
245 Views
Last post by Lotus-e-Clan Tue Nov 06, 2018 9:15 pm
Dynamo test
Replies: 19
by
African Imp »
Sun Sep 02, 2018 7:59 am
First post
Simple question?
The dash pod light on my 1967 Hillman Imp Californian glows red, not bright its dim but not off.
As a test can I disconect the...
Last post
Report from the auto elec man says one regulator has burnt points and cannot be recut.
I told him not to bother as I have now fitted an alternnator.
19 Replies
200 Views
Last post by African Imp Tue Sep 25, 2018 6:51 am
Ignition Help!
Replies: 4
by
paulbag92 »
Tue Aug 28, 2018 6:38 pm
First post
Really strange thing happening, new engine fitted and runs 100%when the coil is connected to constant power, however when it is connected to the...
Last post
Sounds like the ignition switch is wired wrongly.
4 Replies
101 Views
Last post by impmann Thu Aug 30, 2018 11:48 am
Pawl Unit
Replies: 2
by
MMCPJONES »
Mon Mar 05, 2018 3:29 pm
First post
20180227_160115.jpg Hi,
Does anyone recognise this pawl unit cover? I need to get a replacement unit for my Davrian and I'm not sure what it's...
Last post
If this is stopping you driving it link the three wires together and you will get the indicators working - just no self cancel
2 Replies
103 Views
Last post by Dave ' Linwood ' Lane Mon Mar 05, 2018 5:04 pm
Ignition and brake light fault 1968 super
Replies: 1
by
keanej »
Tue Oct 03, 2017 8:19 pm
First post
My car has now developed an intermitent fault, suspect a bare or broken wire some where, is there a common place for a problem ?
Engine starts then...
Last post
Brake light live is supplied from the positive side of the coil.
Check the connections at the coil quite prone to deteriorating at the connections....
1 Replies
90 Views
Last post by bks974c Tue Oct 03, 2017 9:52 pm
Do I fuse the ignition circuit
Replies: 28
by
Dave ' Linwood ' Lane »
Sat Jan 21, 2012 1:58 pm
First post
As you know ive fitted fuse boxes to each car But was advised not to fuse the ignition circuit so havnt done so ,
Thing is it would be a very easy...
Last post
in reality you could pull the spade connectors off the switches at the back or the binnacle and plug in the inline fuses after adding suitable...
28 Replies
574 Views
Last post by The Nun Tue Sep 19, 2017 4:06 pm
Denso Wiring
Replies: 1
by
bks974c »
Fri Aug 11, 2017 11:01 pm
First post
While at the National I was asked by Kev Davis ?????? about the wiring for the Denso Alternator, he was going to text me his email but not received...
Last post
Thanks Scott sorry I haven't been in touch, I am sure it will be helpful to others on here.
Kev
1 Replies
167 Views
Last post by allthingscars Mon Aug 14, 2017 2:43 pm
Odd goings on : ign and oil lights
Replies: 11
by
617sqn »
Mon Jul 17, 2017 6:04 pm
First post
Hi Guys. I've been trying to assist a fellow IMPER with a weird (to me at least) problem. Following some rough running last week he decided to return...
Last post
Ah. Earthing issues can certainly lead to some strange effects! :?
IM 8)
11 Replies
243 Views
Last post by ImpManiac Mon Jul 31, 2017 3:00 pm
yazaki tacho 80mm
Replies: 4
by
chris d »
Sun Jul 30, 2017 1:40 pm
First post
I have a 80mm yazaki tacho I would like to fit in libby (75 imp deluxe)
I have no instructions but have found some info on the net about wiring it...
Last post
cheers dave
will have a look today
ill just unplug the white/black and white from the coil
and see what it does.
it was going to 8000rpm with out the...
4 Replies
116 Views
Last post by chris d Mon Jul 31, 2017 8:05 am
Wiring loom
Replies: 12
by
The Nun »
Sun Dec 06, 2015 10:39 am
First post
If anyone has ever been considering renewing their IMPs wiring loom like I am heres some info that might be useful?
Ive decided after great thought...
Last post
Some of the wiring work we do at century as these are competition cars we cannot take the risk of a high resistance wire stopping the car, it is...
12 Replies
656 Views
Last post by moose Tue Jul 25, 2017 8:00 am
Large spade connectors
Replies: 3
by
imp.sport »
Mon Jul 24, 2017 9:08 pm
First post
Here I'm referring to the mega one planted right in the plain view on the solenoid terminal.
Ive a few old wiring looms from long gone Imps but they...
Last post
/\ Thanks for that.
Looks like I'm having 10 of them. Should prevent me asking again then :roll:
3 Replies
161 Views
Last post by imp.sport Tue Jul 25, 2017 12:14 am
Dynamo to alternator
Replies: 3
by
Death kill »
Fri Jul 07, 2017 1:25 pm
First post
Hello
Needing some help as I'm gonna change from a dynamo to an alternator 3 pin type which I have got but need more info on the wiring side of...
Last post
Sorry only just got round to the dynamo to alternator change!!! Everything worked perfectly easy to follow!!! Thanks Kev
3 Replies
287 Views
Last post by Death kill Fri Jul 21, 2017 7:13 pm
Earthing points
Replies: 3
by
617sqn »
Tue Jul 18, 2017 9:00 am
First post
Is there a list of factory fitted earthing points ? I know where they are on Stan, but these are generally where I've modified things over the past...
Last post
nice one andy
save you bending down under the dash
chris d
3 Replies
120 Views
Last post by chris d Tue Jul 18, 2017 6:36 pm
New indicator stalk from Club Spares
Replies: 8
by
617sqn »
Sat May 20, 2017 8:16 pm
First post
I've recently bought a replacement indicator stalk from Club Spares. A necessary expense as the headlight flash had stopped working on the original...
Last post
:D
Andy G
8 Replies
260 Views
Last post by 617sqn Sun May 21, 2017 8:07 pm
Mk3 indicator stalk part No.
Replies: 14
by
617sqn »
Tue Apr 04, 2017 5:05 pm
First post
Hello. Does anyone know off hand what the part number is for the round dial dash indicator stalk please ? I'm trying to source a brand new one if...
Last post
And so would I. They are the design of the devil, and should be banned ! :evil:
Andy G
14 Replies
199 Views
Last post by 617sqn Wed Apr 05, 2017 8:24 am
self cancelling indicators on mk1
Replies: 2
by
johnedgar1 »
Sun Mar 05, 2017 8:11 pm
First post
any one know the correct procedure for setting the steering colum to the rack splines ,mine did not cancel as the bracket on the inner colum had...
Last post
Yes all in the ws manual, but there's no need to touch the rack to column splines, the canceller pawl is clipped around the inner column and needs to...
2 Replies
212 Views
Last post by The Nun Sun Mar 05, 2017 9:42 pm
Ignition Curve
Replies: 4
by
MMCPJONES »
Tue Nov 15, 2016 8:33 pm
First post
Hi,
I am looking to equip my Davrian with a H & H electronic 'Performance' distributor and wondered if anyone could possibly suggest what advance...
Last post
The list below is compiled from a 20 page spread sheet I found 3 or 4 years ago but never got around doing before.
The spread sheet lists Lucas...
4 Replies
390 Views
Last post by Lars Hagermark Fri Feb 10, 2017 11:27 pm
Starter Motor Jamming
Replies: 7
by
philgsmith »
Thu Feb 09, 2017 1:33 pm
First post
The problem of the start motor jamming continues. It began at WWW in September when it was dealt a few hefty blows with a small hammer by Uncle Malc....
Last post
starting handle??
7 Replies
318 Views
Last post by philgsmith Thu Feb 09, 2017 7:48 pm
New LEDs causing a problem !
Replies: 25
by
617sqn »
Sun Dec 04, 2016 7:36 pm
First post
Hi all. A few weeks back I fitted a new pair of red LED stop and tail bulbs. This followed on from advice given at the National that the existing...
Last post
As I have clear lenses, only red LEDs would do. Are these available on the string type ?
Andy G
25 Replies
595 Views
Last post by 617sqn Sat Dec 17, 2016 11:07 pm
sport 25d distributor
Replies: 1
by
johnedgar1 »
Fri Nov 11, 2016 8:32 pm
First post
is there any difference in the caps ,, side entry or top entry, are they interchangeable, thanks
Last post
They aren't interchangeable from what I remember its where the LT lead enters that's completely different.
1 Replies
141 Views
Last post by The Nun Fri Nov 11, 2016 9:40 pm
Electronic Ignition
Replies: 1
by
MMCPJONES »
Mon Nov 07, 2016 5:15 pm
First post
Hi,
I'm going to treat my Davrian to a new ignition system. I'd like to go mapped, but this is beyond my budget at present. So, I'm thinking of...
Last post
Martyn,
I've still got the complete spare Weber Alpha system sitting in the garage. Probably not as expensive as you're thinking. Send me a pm or...
1 Replies
238 Views
Last post by benwick3 Mon Nov 07, 2016 7:44 pm
Denso alternator - Sorted ...
Replies: 4
by
philgsmith »
Mon Feb 15, 2016 10:09 pm
First post
Hi guys
I need some help please. I'm doing an alternator conversion to a Denso unit.
Everything is in place but turning the ignition on doesn't...
Last post
Glad you got it fixed, Phil! :mrgreen:
I hope to catch up with you, Lesley and Hilda at Hatton Country Park in the summer.
IM 8)
4 Replies
442 Views
Last post by ImpManiac Fri Feb 19, 2016 9:28 am
Stans high level brake light.
Replies: 16
by
617sqn »
Tue Oct 13, 2015 8:53 pm
First post
WP_20151013_12_14_04_Pro.jpg I've been asked about Stans high level brake light. Took these images today. No manufacturers name that I can see. 140...
Last post
No i guarantee my new MINI its the red brake lights that flash under heavy/emergency braking, they are LED type lights too.
The hazzards will come...
16 Replies
248 Views
Last post by The Nun Sun Nov 08, 2015 9:23 pm
LED Light bulbs
Replies: 23
by
The Nun »
Wed Oct 29, 2014 6:18 pm
First post
Ive just been reading something in the latest Practical Classics magazine about fitment of LED bulbs to replace the old filament ones.
They say UK...
Last post
The world is a hole when some drivers can lose their licence, or worse, get a book thrown at them! for having the wrong bulb in their lights, yet the...
23 Replies
510 Views
Last post by kilty Sat Oct 03, 2015 6:33 pm
Starter Motor Brushes
Replies: 4
by
Smudge »
Tue Aug 11, 2015 5:53 pm
First post
Hi All,
Any suggestions as to the best place to source starter motor brushes?
Cheers,
G Imp007
Last post
Cool, thanks 8)
4 Replies
247 Views
Last post by Smudge Tue Aug 11, 2015 11:10 pm
Lumination Ignition
Replies: 12
by
Peter Hurst »
Sat Jan 24, 2015 6:40 pm
First post
A couple of years ago Ii bought a Lumination Ignition kit from an auto jumble for £35. All the bits were there including a coil and leads but wasn't...
Last post
Which Volvo did your Bosch module come from? I have three 930 distributors (two of them still in the complete 930 engines), but I have not looked to...
12 Replies
452 Views
Last post by Turboimp Tue Jan 27, 2015 6:16 pm
alternator
Replies: 2
by
johnedgar1 »
Sat Jan 17, 2015 9:49 pm
First post
what type of period high output alternator was used on the rally imps ,for the extra spotlights,
Last post
I suggest you talk to the very helpful people at Maynard motorsort :D
2 Replies
172 Views
Last post by pubcrawler Sat Jan 17, 2015 11:05 pm
Blower fan CFM?
Replies: 9
by
oli »
Sat Aug 09, 2014 12:02 pm
First post
Hi all, does anyone know what the Cubic Feet per Minute rating is for the Imp's standard heater blower fan? I'm thinking of fitting an inline blower...
Last post
I got mine from good old Ebay there is quite a choice available though.
Mike
9 Replies
372 Views
Last post by Yoshie Mon Aug 11, 2014 3:07 pm
Alternator
Replies: 8
by
Dave ' Linwood ' Lane »
Sat Mar 22, 2014 5:46 pm
First post
Alternators faulty , if your wiring is perfect theres nothing left that will cause it
Last post
Have you managed to sort this problem yet?
8 Replies
456 Views
Last post by gnatman Thu Mar 27, 2014 8:40 pm
Battery Charge light
Replies: 4
by
moose »
Fri Jul 16, 2010 8:37 am
First post
could be an earth fault or low battery voltage, low dynamo/alternater output check the voltage of the battery with a meter 12.5 or above and then...
Last post
Do you have a multi-meter? :?: Also do you have a decent wiring diagram, like the ones in the Rootes workshop manual or Haynes manual? :?:
Check...
4 Replies
773 Views
Last post by ImpManiac Wed Mar 05, 2014 10:17 pm
fuel tank sender unit
Replies: 7
by
Turboimp »
Sat Aug 17, 2013 11:18 pm
First post
Your description fits the early up to 1969 sender units ... One of the screws would have had a copper washer on to ensure a good earth . Imp009
Last post
Hi Nick
It seems to work.
i'd guess this is because the upper side of thee ring is clamped hard against the inside of the tank by the screws, whereas...
7 Replies
512 Views
Last post by GaryH Fri Oct 25, 2013 8:24 pm
sender switches on engine
Replies: 4
by
littlephil »
Tue Jun 25, 2013 2:58 pm
First post
Hi all. I am puzzled by all the senders on the engine. I have a water temp gauge but cant see on the wiring diagram where the sender unit is.
On the...
Last post
^^ Not sure. I have a vague feeling that it is white with a blue trace but I am not certain by any means. Do you have a factory or Haynes workshop...
4 Replies
329 Views
Last post by ImpManiac Tue Jun 25, 2013 9:22 pm
123 Dizzy
Replies: 1
by
Delboyjones »
Sun Jun 16, 2013 9:06 pm
First post
Has anyone fitted a 123 distributor to an imp engine ?
I have a Ginetta G15 with a 998,bvh,r20 and am fitting a 40 dhla on a combined manifold.
I...
Last post
Talk to Rob Comberbatch (munirider). 123 distributor guru in these parts.
HTH,
Bob.
1 Replies
353 Views
Last post by phatbob Mon Jun 17, 2013 12:19 pm
Red warning light
Replies: 2
by
Fixer702 »
Thu Jul 26, 2012 10:51 pm
First post
Hey, just been out in the car and noticed my red warning light was on, its not fully light, its on faintly (when car is running). Help please....
Last post
Hi
A bit late for Ian, but FWIW its a common fault with a free and simple cure. The cause is almost certain to be dirty contacts on the Cutout Relay...
2 Replies
321 Views
Last post by GaryH Wed Jan 09, 2013 10:03 am
extra gauges
Replies: 6
by
chris d »
Thu Sep 27, 2012 2:38 pm
First post
with your help ,i would like to instal a clock/volt gauge and oil pressure gauge.
i am not very good when it comes to electric jobs hence the...
Last post
Heres a really simplistic version of what ive done
Run an extra 50A cable from the battery to the front bulkhead , this is fused as close as possible...
6 Replies
672 Views
Last post by Dave ' Linwood ' Lane Sun Sep 30, 2012 7:44 pm
need a direction indicator relais
Replies: 5
by
clewits »
Fri Jul 27, 2012 10:52 am
First post
Hi Guys,
This morning I discovered that my Hillman Imp MK2 has it's direction indicator relais rusted through
onderneath the small dash, rain water...
Last post
Halfords have a wide range of indicator relays including Part No 204 at £9.49, an electronic 3 terminal relay which I have just fitted to our 1970...
5 Replies
374 Views
Last post by billingworth Wed Aug 29, 2012 4:17 pm
Ignition/starting concerns...
Replies: 2
by
bks974c »
Tue Jul 17, 2012 10:55 pm
First post
Possibly electronic ignition not seeing 12V when starter motor cranking - try a bigger/battery and see what happens or jump leads to a second one.
A...
Last post
John, I've had this exact issue with a brand new, still-in-wrapper ignition switch purchased from an Imp specialist. Ignition on: lights working and...
2 Replies
326 Views
Last post by ImpManiac Wed Jul 18, 2012 5:43 pm
Temp Gauge from a Mini
Replies: 2
by
moose »
Sat Jun 30, 2012 3:44 pm
First post
the imp sender talbot part number 1205552 is 5/8 unf thread (smiths sender part number a-tt05) the mini sender is smiths part num a-tt04 so you need...
Last post
Nice of you to give the gauge a better life, it having spent so long in an inferior car! :wink: :lol:
2 Replies
407 Views
Last post by bazzateer Sun Jul 01, 2012 11:55 am
Ballast Resistor
Replies: 4
by
pubcrawler »
Wed Jun 27, 2012 3:55 pm
First post
Fitting a sports coil designed for none ballasted ignitions. Where is the ballast resistor :?: , is it located within the loom? I can see it is fed...
Last post
Thanks again for the prompt replies :D , will wire it tomorrow. After re-looking at the wiring diagram you have confirmed my thoughts that the...
4 Replies
372 Views
Last post by pubcrawler Thu Jun 28, 2012 12:07 am
Coil 12v Electrickery
Replies: 9
by
Duk »
Thu May 17, 2012 12:58 pm
First post
I seem to be getting 12v from both sides of the coil so no spark, the only difference made from when it was working previously is running wires...
Last post
I decided to run an additional earth from engine to chassis.
Utilised the oil cooler mount I had just fitted.
Car starts a lot better now :D :D
9 Replies
368 Views
Last post by tomcat Wed May 23, 2012 8:41 am
mk 1 wipers not working ,
by
johnedgar1 »
Wed May 16, 2012 10:46 pm
power going to wipers , checked the earth ,even tried another motor , any suggestions anyone ,johnedgar1
0 Replies
138 Views
Last post by johnedgar1 Wed May 16, 2012 10:46 pm
Edis/MegaJolt system Questions
Replies: 49
by
chris »
Wed Jun 29, 2011 8:05 pm
First post
Hi All, going to quickly slap my MegaJolt system on the turbo before National hopefully being used after a rolling road session otherwise Ill just be...
Last post
Edis wired up fully, just need to wire up the megajolt on the back shelf now, sensor and coil pack connections done too.
leads shortened
Much...
49 Replies
1369 Views
Last post by chris Sun Mar 18, 2012 10:14 pm
Need help, wiring question
Replies: 8
by
Jens »
Fri Mar 16, 2012 11:04 am
First post
Hi all.
My question is not only concerning imp but general....
I want to put a new cable from the battery, let's say 6mm2, to go to the front of the...
Last post
Laurent, you are not boring! And the only silly questions are those that we don't ask when we need to. :wink:
IM 8)
8 Replies
320 Views
Last post by ImpManiac Sat Mar 17, 2012 11:19 am
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum