Homologation Papers
by
Dave Dickinson »
Tue May 05, 2020 2:32 pm
Below are homologation papers which can be downloaded.
Supplied by Events Secretary 05/05/2020
homologation_group1_production_touring.pdf...
0 Replies
2854 Views
Last post by Dave Dickinson
Tue May 05, 2020 2:32 pm
Works disc brakes/Viva discs/homologation
Replies: 4
by
Gemini »
Wed Mar 05, 2008 6:40 am
First post
:( Anyone know the size of the Viva discs originally used by the works?
Also were the calipers Herald or what and what brackets?
Finally what was...
Last post
Thanks guys for all that info much appreciated.
Did the Girling D14R calipers have different sized pads from the homologated ones? I.e Bigger pads?...
4 Replies
2363 Views
Last post by Gemini
Wed Mar 05, 2008 11:19 pm
Info on 410 lift cams
Replies: 12
by
mtnbikepoacher »
Tue Nov 16, 2004 3:32 pm
First post
Hi all you race fans,
I'm looking into what is involved in the use of a 410 race cam. It looks like one needs to use a special cam carrier. Is the...
Last post
Mark give me a day or three and I think I will be able to come up with something
12 Replies
6382 Views
Last post by johnh875
Thu Feb 07, 2008 4:52 am
donuts
Replies: 1
by
HARRY »
Thu Jan 31, 2008 11:46 am
First post
ok boys, what size of bolts will i use for the donunt . :?:
Last post
either proper stepped bolts with are 7/16 on the shank but take a 3/8unf nut
or just use decent sttraight 7/16UNF bolts and nylocs
Si
1 Replies
1652 Views
Last post by rootes
Thu Jan 31, 2008 11:50 am
Wedge Heads
Replies: 3
by
Bevan IMP »
Sat Dec 01, 2007 7:03 pm
First post
I spoke to my father the other day and he mentioned that he had been on the Imp Club site!!!!
He was reading about the Andy Chesman's wedged heads...
Last post
That would make sense...the Frazer B timing is is 32 72 72 32 and is a good cam by the accounts I've read. So GB 72 could be a version of that....
3 Replies
2504 Views
Last post by Lotus-e-Clan
Sat Dec 01, 2007 10:19 pm
Clan modsport + mods
Replies: 10
by
rootes »
Mon Oct 15, 2007 2:58 pm
First post
foam in the sill is a good idea.
Last post
Mark
Andrew Till's clan has been retired for the near future, he had a few engine problems last year and the car could really do with a re-build (...
10 Replies
5484 Views
Last post by rootes
Tue Oct 16, 2007 9:23 pm
stilleto heated screens
Replies: 7
by
SimonBenoy »
Thu Oct 11, 2007 10:16 pm
First post
Is this front or rear?
Last post
Baz,
Not for a coupe, they're not...
Ahh...........Hoping to take Jack to Silverstone next week Simon :D
7 Replies
4976 Views
Last post by bazzateer
Sat Oct 13, 2007 9:54 pm
Front oil cooler tubing size?
Replies: 5
by
mtnbikepoacher »
Thu Sep 20, 2007 6:31 am
First post
Hey all,
I'm planning on moving the oil cooler to the front on the race car as it's not getting cool enough in the back.
What size tubes are...
Last post
Al,
My temp sensor is in the line from the separate oil filter to the engine via the port from the original filter assembly. i.e. from the tank -...
5 Replies
3060 Views
Last post by benwick3
Thu Sep 20, 2007 6:12 pm
fixings of race harness
Replies: 4
by
onomatopoeia »
Mon Sep 03, 2007 9:27 am
First post
My interpretation is that you can*. My car is configured that way and it hasn't presented a problem to date. For a definitive answer you should...
Last post
Rumour has it that six pont belts are likely to become mandatory for racing. Also, all parts of the harness will require the same FIA date stamp so...
4 Replies
3431 Views
Last post by rally clan
Tue Sep 04, 2007 8:59 pm
harnesses
by
Megapin »
Mon Sep 03, 2007 4:44 pm
I think it's legal at the moment but seem to remember the last
MSA flyer that came out was outlawing single point (rear) fixings for next year ....
0 Replies
1915 Views
Last post by Megapin
Mon Sep 03, 2007 4:44 pm
Perspex pre 1968
Replies: 8
by
Gemini »
Sun Aug 19, 2007 10:38 am
First post
Anyone know whether Imps were rallied with perspex side and rear windows pre 68? Malkin car was a lightweight machine but did it have perspex and...
Last post
K&N's get blocked on really dusty rallies too i am going for duct from side window like you are thinking make sure it is all fireproof i had an air...
8 Replies
3806 Views
Last post by moose
Sun Sep 02, 2007 10:47 pm
blade imp
Replies: 2
by
GURNSIMPS »
Fri Jul 27, 2007 8:01 am
First post
Don't know if this is the right place to post this but seen a video on me mates phone last night of the red imp with the fireblade engine going up...
Last post
Thats the one Frank, all me mates think I should give my imp the bike engine treatment after seeing that thing fly over Epynt!! :roll:
2 Replies
2277 Views
Last post by GURNSIMPS
Fri Jul 27, 2007 12:53 pm
28/36 Weber Filter that will clear fuel pump & shelf?
Replies: 5
by
oli »
Tue Jul 24, 2007 10:56 pm
First post
Hi there everyone, does anyone have, or know where I can get a reasonale air filter for the 28/36 Weber that I have fitted to my temporary engine...
Last post
I've just bought a ramflo, not on the car yet, but it certainly looks like a nice piece of kit :)
5 Replies
2755 Views
Last post by skamanfrank
Fri Jul 27, 2007 11:57 am
Piper Competition Camshafts
Replies: 3
by
rje »
Sun May 13, 2007 6:02 pm
First post
Has anyone used/does anyone know the characteristics of a Piper 1R4 - is it like an R20/22? There's one in an engine I just bought and I have no idea...
Last post
Piper say they have no details on any of their old cams - they had never heard of a 1R4 or a 1R9. They have offered to meausre it and tell me what it...
3 Replies
2359 Views
Last post by rje
Mon May 14, 2007 9:34 am
Noise Testing
Replies: 13
by
sunstrip_steve »
Thu Feb 22, 2007 9:48 am
First post
Can anyone tell me what the standard methodology for noise testing a car is for race circuits? some have restrictions of 95 dB or 105 dB. Is this a...
Last post
In the rallying i do it is 96dba at 45 deg at .5 meter with no buildings or structures that noise can bounce off within 200 meters (this is in the...
13 Replies
6027 Views
Last post by moose
Fri Mar 09, 2007 12:07 pm
Works colour Code
by
rally clan »
Tue Feb 06, 2007 12:59 pm
On later works Imp they were mainly white, with the sides a light blue colour, does anyone know what colour code this blue was and the white of...
0 Replies
2401 Views
Last post by rally clan
Tue Feb 06, 2007 12:59 pm
Rally lights
Replies: 4
by
Useless Eustace »
Wed Oct 25, 2006 4:49 pm
First post
Looking for a small waterproof three pin plug & socket to make auxiliary lamps easily removeable. Lucas used to make one I believe but I can't track...
Last post
Ta much............I'll give them a bash :D
4 Replies
3200 Views
Last post by Useless Eustace
Wed Oct 25, 2006 7:19 pm
0 Replies
2452 Views
Last post by mtnbikepoacher
Fri May 19, 2006 2:09 am
SOVREN Spring Sprints 06, AKA: Abarth blood bath!!!
Replies: 4
by
mtnbikepoacher »
Tue May 16, 2006 4:16 am
First post
The event went off without a hitch save Dave Guenthers Imps bonnet not staying shut for the last race and he having to sit it out. Broken spring on...
Last post
Pete,
Hoosier had some of their discontinued tyres on sale for half off, and one of the problems I felt the Imp was having was a lack of rubber. The...
4 Replies
3233 Views
Last post by mtnbikepoacher
Tue May 16, 2006 2:28 pm
0 Replies
2186 Views
Last post by forum_admin
Sun May 14, 2006 10:35 am
Roll Cages
Replies: 3
by
rootes »
Thu Mar 23, 2006 11:37 am
First post
If you want Safety Devices cage for you imp..
you now have to buy though Imptechnic
.......
Seems that Safety Devices are franchising out...
Last post
FYI Rollcentre racing also do 'off the peg' cages but also need 8 weeks to build you one. You can find them at
cheers
Rich
yep I noticed they do...
3 Replies
4100 Views
Last post by rootes
Thu Mar 23, 2006 10:30 pm
Pivot Heights
Replies: 8
by
Englander »
Sun Feb 12, 2006 2:29 pm
First post
Hello Sports fans,
A picture of Adrian Olivers racer and an old pic of Ray Payne caught my attention recently, particularly as I am just rebuilding...
Last post
Well, can't rule it out completely, depends on lots of factors of course, including spring rates, ride height, driving style etc. Mainly I meant that...
8 Replies
4783 Views
Last post by Gerry Richards
Tue Feb 14, 2006 4:22 pm
3 and 4 point Harness Fitting
Replies: 5
by
rootes »
Sat Jul 23, 2005 8:30 am
First post
Hi Guys,
apart from issues fo proper bolts, load spreading plates etc..
where on the rear deck (ie above engine) is the best place to create some...
Last post
Hi Si,
My 4 point's are marked not for road use but fully FIA approved, so i can hurtle round a track but not use them on the road?? seems well...
5 Replies
3264 Views
Last post by cov_climax
Mon Jul 25, 2005 10:57 pm
Bevan Imp parts
Replies: 1
by
Bevan IMP »
Tue Jan 18, 2005 6:21 pm
First post
I am trying to track down a Bevan cam cover which my Grandfather used to fit on some of his engines, If anyone has this or any other bits relating to...
Last post
After 5 years of searching I finally found one on ebay. I put in a bid of £200 and crossed my fingers.
The cam cover sold for £280 pounds and after...
1 Replies
2550 Views
Last post by Bevan IMP
Tue Jul 12, 2005 9:45 pm
Race cams
Replies: 5
by
rootes »
Sun Jul 03, 2005 10:36 am
First post
Fraser 'B'
?
Si
Last post
We don't have 98 octane on the left coast. Only 92... and it's about $2.60 today.
I think California has MTBE in it which may raise it a little, but...
5 Replies
4921 Views
Last post by mtnbikepoacher
Wed Jul 06, 2005 9:31 pm
twin webber carb cables desperate for help!!!
Replies: 3
by
SimonBenoy »
Mon Jun 13, 2005 6:34 pm
First post
Can you up a picture of your linkage?
Presumably your engine is longitudinal, so should be similar to Imp fittings.
Do you have a magard style...
Last post
on my weber carbs it appears I'm only getting just over half throttle movement at the carb despite burying the pedal in the carpet still it means...
3 Replies
3407 Views
Last post by Keith 'Supaimpy' Laming
Wed Jul 06, 2005 5:20 pm
0 Replies
2355 Views
Last post by mtnbikepoacher
Mon Jul 04, 2005 4:21 pm
Fender flares and the FIA...
by
mtnbikepoacher »
Mon May 23, 2005 3:23 pm
Hey all,
I'm looking into when fender flares were allowed on Imp racers. I see a team Hartwell car raced by Ray Payne won in 1967 BARC. with some...
0 Replies
2347 Views
Last post by mtnbikepoacher
Mon May 23, 2005 3:23 pm
Jack Knight Gearbox Wanted
Replies: 1
by
MATTinSURREY »
Wed May 18, 2005 7:59 am
First post
Looking for JK 4 or 5 speed gearbox. Anyone got one lying around at a favourable price? Email me: mattinsurrey@hotmail.com or call me on 07767 705566
Last post
There was one recently listed in the parts for sale section below.
1 Replies
2614 Views
Last post by mtnbikepoacher
Wed May 18, 2005 2:47 pm
The gauntlet has been thown in the face of the Imps!
Replies: 2
by
mtnbikepoacher »
Tue Apr 19, 2005 3:28 pm
First post
Hey all,
Our 2 race Imps and drivers made it through their first race weekend. On the tracka s competition was a Fiat Abarth with a 1 ltr in it.
A...
Last post
Just remind the Fiat drivers of when they came to the U.K in the 70's and got thrashed by the Bevan Imp.
My Grandfather was talking to a Fiat owner...
2 Replies
2679 Views
Last post by Bevan IMP
Thu Apr 28, 2005 8:23 am
catch tank
by
Keith 'Supaimpy' Laming »
Sat Apr 09, 2005 7:31 pm
anyone got a picture of a 1 litre catch tank installed on an imp with the battery retained in std position?
it seems I need to fit one before...
0 Replies
2429 Views
Last post by Keith 'Supaimpy' Laming
Sat Apr 09, 2005 7:31 pm
0 Replies
2511 Views
Last post by sunstrip_steve
Thu Mar 31, 2005 10:22 pm
.390 lift cam
Replies: 4
by
mtnbikepoacher »
Wed Jan 12, 2005 2:32 am
First post
Hi all,
I took the measurements off a cam i was taking down to have duplicated. It came it at a .390 lift. The only designator was KCF1 and a large 3...
Last post
One of my colleagues recounts a tale of a guy in circuit racing who competed in his Lotus Elan. He built his own engine. He worked for a company that...
4 Replies
3684 Views
Last post by ImpManiac
Thu Mar 31, 2005 8:55 pm
Imp hot rod, suspension advice...
Replies: 1
by
forum_admin »
Sun Mar 20, 2005 8:13 pm
First post
worth looking at these? an autograsser but...
Click Pics for a bigger version
578
566
559
some more in the same album as well..
Si
Last post
If you scrimp on the cost of the suspension components it will be a false economy and you will pay with poor handling.
Imp coil over shocks are not...
1 Replies
3553 Views
Last post by benwick3
Sun Mar 20, 2005 9:08 pm
roll cage
Replies: 4
by
Keith 'Supaimpy' Laming »
Mon Feb 21, 2005 9:35 pm
First post
if you want to use a cage in competition it needs to meet msa regs.
you'll find the diagrams and specs in the blue book
Last post
Chromoly and T45 are totally different materials with different behaviuors. It just happens that they are almost the same when it come to yield...
4 Replies
9022 Views
Last post by imull
Thu Feb 24, 2005 6:48 pm
interiors
Replies: 3
by
forum_admin »
Sun Feb 13, 2005 8:12 pm
First post
hi,thanks.that what im looking for anybody got an idea where i can get one? matt
Most Imp specialists... have a look on the spares page. or they do...
Last post
Matt,
You do see them up on ebay nowadays, but what guage of GRP it will be is anyones guess, but why go that route.
The standard pod is dirt...
3 Replies
3954 Views
Last post by SuperSport
Wed Feb 23, 2005 12:18 am
Body seam welding for road race use.
Replies: 3
by
mtnbikepoacher »
Wed Nov 03, 2004 7:31 pm
First post
Hi all,
This is sort of an extension of the topic of lightening the body that was in the body work section.
In any case, I'm at the point that I'd...
Last post
Mie is a early shell (64) and it will also get a rollcage (full) put in so maybe I'll just plan around that.
Thanks for the info
Al
3 Replies
3538 Views
Last post by mtnbikepoacher
Thu Nov 04, 2004 8:34 pm
930/Imp flywheel
by
rootes »
Tue Jun 08, 2004 9:10 pm
Dennis Allt transimp@ntlworld.com can supply / help with the correct flywheel.. which is a standard 930 flywheel modified to suit the imp clutch...
0 Replies
2915 Views
Last post by rootes
Tue Jun 08, 2004 9:10 pm
Road Rally car mods
Replies: 2
by
rhydian_mason »
Tue Jun 01, 2004 3:36 pm
First post
When I did road rallies a couple of years ago in an Imp I always used bumpers - very handy for saving the front and rear corners when 'over-cooking'...
Last post
Are you a member of a car club? There are a few active clubs in your area. Possibly even try and find one that has members active in road rallying....
2 Replies
5927 Views
Last post by imull
Fri Jun 04, 2004 12:11 pm
930cc Sunbeam Tuning
by
rootes »
Mon May 31, 2004 11:23 am
Hi Jonny,
yes give Dennis Allt a buzz at Transimp... he used to have a quick 998 Sunbeam 1.0l when he was young... he runs an imp engine tuning...
0 Replies
3620 Views
Last post by rootes
Mon May 31, 2004 11:23 am
Vixen Single Seater
by
forum_admin »
Mon Mar 01, 2004 9:37 pm
Can anyone help with this:
I would appreciate some help with the purchase of a VIXEN FORMULA 4 single seater that I wish to use for sprints and...
0 Replies
2780 Views
Last post by forum_admin
Mon Mar 01, 2004 9:37 pm
Sound Levels
by
rootes »
Fri Feb 20, 2004 10:09 pm
Hi Joe,
perhaps try one of these... a decibel inserts fits inside the exhaust.
£6 from Merlin Motorsport or any Jetex Dealer..
can be fitted...
0 Replies
2351 Views
Last post by rootes
Fri Feb 20, 2004 10:09 pm
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum