Homologation Papers
by
Dave Dickinson »
Tue May 05, 2020 2:32 pm
Below are homologation papers which can be downloaded.
Supplied by Events Secretary 05/05/2020
homologation_group1_production_touring.pdf...
0 Replies
3008 Views
Last post by Dave Dickinson
Tue May 05, 2020 2:32 pm
imps vs mini shootout
Replies: 2
by
james »
Tue Jul 03, 2012 7:33 pm
First post
Make the Imp engine Vs Mini engine interesting - equal minimum weights and capacity cap of 1000cc, naturally aspirated, other engine mods free....
Last post
from experience of rallying round the Alps with Imps and Minis, the 1000cc Mini is no match for the 998cc Imp on the road, the 998 is more matched to...
2 Replies
3631 Views
Last post by 67cali
Tue Jul 03, 2012 9:02 pm
alloy rad
Replies: 4
by
bazzateer »
Fri Jun 22, 2012 10:07 am
First post
Much depends on which championship you intend to compete in, the MSA Blue book should be able to tell you.
Last post
The first use of discs on an Imp on an International rally was 1965 and they were on a dual circuit system - they only used them once. Discs weren't...
4 Replies
4859 Views
Last post by rje
Mon Jun 25, 2012 9:59 am
Hillclimb 1040 spec
Replies: 1
by
Stakhanovite »
Sat Jun 16, 2012 11:12 pm
First post
The build of my G15 hillclimber is creeping along. I'm going to have to look at engine spec and builder fairly soon. Box is a JK 4 speed. I had a mk...
Last post
Should be fine but in my experience you should be able to get away with using a R23 if you are going to mapped ignition. You get the extra power but...
1 Replies
2177 Views
Last post by benwick3
Sun Jun 17, 2012 12:36 am
Pedal box and brake lines
Replies: 2
by
anderson121 »
Wed Jun 06, 2012 11:47 am
First post
I have just bought a pedal box and 0.625 cylinders, looks the part. Being fitted to an Imp I am preparing for Rally, hillclimbs, etc. Next thing,...
Last post
Hi, thanks for the reply. I live near Durham and between us at Durham Auto Club we struggle for Imp experts, they all seem to be further South. I...
2 Replies
2911 Views
Last post by anderson121
Thu Jun 07, 2012 4:18 pm
Installing perspex (plastic) windows
Replies: 12
by
mtnbikepoacher »
Fri Apr 01, 2005 4:10 pm
First post
Hey all,
I made the mistake of going the cheap route on buying plastic for my windows as acrylic was half the cost of Lexan.
When I went to drill...
Last post
^^ Wisdom. :)
Perspex is a trade name and the material name is poly(methyl methacrylate) (PMMA). Polycarbonate is an entirely different polymer...
12 Replies
10649 Views
Last post by ImpManiac
Mon May 21, 2012 12:51 pm
Clutch release
Replies: 17
by
doc knutsen »
Tue Aug 09, 2011 7:53 pm
First post
Due to HTP issues and a long delay in getting the latest engine built for my son Matt's Bevan-inspired car, our pair of racing Imps is only now about...
Last post
I like your videos! :mrgreen: The yellow race car certainly goes rather well. I see what you and Mr. Weedon mean about the ratios, though. She...
17 Replies
24746 Views
Last post by ImpManiac
Wed May 16, 2012 11:53 pm
Lifing competition rotoflex couplings
Replies: 9
by
Nigel Webster (anrw) »
Sun Mar 04, 2012 4:22 pm
First post
Does anyone have any advice on lifing competition Rotoflex couplings? Whilst the stage rallying I do isn't really comparable to circuit racing (we...
Last post
I was told by the Comps. Dept that the bolts will break before a competition rotoflex so long as it is in good condition. As I said earlier, I broke...
9 Replies
5033 Views
Last post by Rod
Fri Mar 30, 2012 8:08 am
Turbo Davrian
Replies: 16
by
Davrianman »
Tue Mar 13, 2012 9:30 pm
First post
Hi All,
My name is Martin Jones. I have been out of the imp scene for a few years, so I was wondering what was happening in the world of imp racing...
Last post
I have a Mk6/7a Turbo Davrian some of you may remember. I used to sprint it and Hillclimb in the HSA Championship around 1999/2000
I remember you...
16 Replies
8173 Views
Last post by onomatopoeia
Thu Mar 29, 2012 3:35 pm
Race harness life span
Replies: 11
by
apeximp »
Mon Nov 28, 2011 7:22 pm
First post
Can anyone remind me what the life span of a NEW seatbelt harness is ? My set are out of date after only four races !!! :( think the were dated for...
Last post
That,s good news Peter Lloyd ralling only lists 2015, I looked on some forums and was misinformed. Rang Peter LLoyd and it is 2017 as you say so...
11 Replies
6237 Views
Last post by Adrian
Wed Feb 22, 2012 8:58 am
Cam timing and reliance on factory data
Replies: 7
by
pre65racer »
Tue Jan 24, 2012 2:37 am
First post
Knowing your cam and why you should set up a cam using the lobe centres not factory quoted lift at TDC.
Out of interest we went through the cam...
Last post
There are at least two quite different specs for the Piper BP285. Makes you wonder why they didn't give it a different name? I guess it is down to...
7 Replies
3918 Views
Last post by bks974c
Wed Jan 25, 2012 9:57 pm
Dynamic Compression ratio
Replies: 7
by
pre65racer »
Tue Nov 22, 2011 1:41 am
First post
If you have ever wondered why just swapping cams for a longer duration item can often have the opposite effect on the cars overall performance google...
Last post
Very comprehensive list of fuels and properties.
The fuel we use is listed as EXON Mobil Aviation fuel. 99.5 MON minimum.
7 Replies
4373 Views
Last post by pre65racer
Wed Jan 25, 2012 2:19 am
head porting
Replies: 3
by
tigeralpine »
Thu Dec 22, 2011 9:12 pm
First post
Looking for info and pics on porting my Imp sport head?
Last post
I have a picture of a cross section sport head on my phone. Will try and load it up if I remeber. When I asked about porting in the members only...
3 Replies
2934 Views
Last post by basil imp
Sun Dec 25, 2011 4:29 pm
0 Replies
2292 Views
Last post by Nigel Webster (anrw)
Fri Nov 25, 2011 7:25 pm
Shock absorbers
Replies: 3
by
anderson121 »
Tue Aug 30, 2011 6:48 pm
First post
I am rebuilding an Imp for road rallies, sprints and hillclimbs. What shock asorbers do you think I should be using with Monte Carlo springs?
Some...
Last post
With shock absorbers, as with many things in life, it seems you get what you pay for. :D I would love a set of Konis, Nitrons or the super-whizz...
3 Replies
1968 Views
Last post by ImpManiac
Wed Aug 31, 2011 10:59 pm
Speedo drive with Viva hubs / discs
Replies: 15
by
Nigel Webster (anrw) »
Wed Jul 20, 2011 6:33 pm
First post
Hello
Has anyone found a foolproof way of engaging the speedo cable on a car fitted with the Viva hubs /disc setup. With mine, every time I get full...
Last post
Many thanks for the helpful comments on this subject - now sorted (I hope) and will be put to the test at the Neath Valley Stages this weekend - see...
15 Replies
5132 Views
Last post by Nigel Webster (anrw)
Fri Aug 12, 2011 12:05 pm
rollcage Ginetta
by
simon hulse »
Sat Jul 16, 2011 11:06 pm
This is the new address of the the now defunct Ginetta heritage forum, The G15 section is still very active and there is some usefull information on...
0 Replies
1669 Views
Last post by simon hulse
Sat Jul 16, 2011 11:06 pm
Improving brakes on rally Imp
Replies: 14
by
Gemini »
Thu Jun 02, 2011 8:54 am
First post
Hi All,
I am currently running the following brake set-up on my 998 Rally Imp
Viva discs front, standard drums rear
Master Cyls - Front .7 Rear...
Last post
Hi Geoff. Just picked up this thread. On my Rally Sport Imp I had .625 m/cyls on original pivot point distance. On the front:- Viva discs and hubs,...
14 Replies
6350 Views
Last post by Mike Hanna
Sun Jun 19, 2011 7:29 pm
Rally Imp Picture
Replies: 44
by
rally clan »
Tue Dec 11, 2007 2:31 pm
First post
Fergus has a selection of photos of Andy Dawson and some Imps, on the 71 Manx, 78 Galway.
Last post
My old Imp is pictured in the British rally forum pictures link driven by another owner. I prefer to think I drove it a little harder..............
44 Replies
31205 Views
Last post by brakedisc
Tue Jan 04, 2011 10:45 pm
All imp, clan, ginetta race cars.
Replies: 6
by
speeddemon »
Thu Nov 25, 2010 7:57 pm
First post
Hi all . As many may know i have beeen helping with the HTS. After many calls and emails i have been able to come up with a race series to accomodate...
Last post
Mike, any exposure for HTS has to be a good thing, well done! As you know I'm in the process of building a racer for next year, primarily for HSCC,...
6 Replies
3191 Views
Last post by Meltdown
Sun Nov 28, 2010 2:58 pm
Costin Nathan at Classic Le Mans
Replies: 5
by
SimonBenoy »
Sun Sep 05, 2010 12:52 pm
First post
I had a good look at the Costin Nathan at the Le Mans Classic. It was beautifully prepared and sounded very nice and was running well. There are 3 45...
Last post
An Imp Club trip for those on a tight budget would be brilliant... 8)
IM 8)
If you book the tunnel/ferry early enough it's around £40, and...
5 Replies
3234 Views
Last post by Meltdown
Sun Sep 19, 2010 12:17 pm
Cross-drilled Imp crank?
Replies: 3
by
mtnbikepoacher »
Wed Sep 08, 2010 5:41 am
First post
Hi All,
A dry-sumped Imp engine in a Beach sport racer is still suffering from some unknown problem that is causing #3 rod/big end to get hot and...
Last post
Alan,
If you analyse the oil flow to the big ends, no 1. receives oil from the front main bearing, no. 4 from the rear main bearing but nos. 2 and 3...
3 Replies
1956 Views
Last post by Impecunious
Wed Sep 08, 2010 1:07 pm
carbon pannels
Replies: 6
by
ben »
Fri Jul 30, 2010 9:26 pm
First post
I would absolutey love a bonnet 8) 8) Have looked into it with carbon weezels and they can produce one that is double skinned as in interior and...
Last post
Hi Dave the £800 included the cost of the mould but I would be supplying the bonnet for them to mould from. Like I said i also think 800 quid is an...
6 Replies
3351 Views
Last post by ben
Tue Sep 07, 2010 1:44 pm
J Knight set
Replies: 16
by
Grumpyoldmen »
Mon Aug 02, 2010 9:15 pm
First post
About the J Knight set on Ebay. 110566560364
Ratios: 16.52 , 8.9 , 6.55 , 5.05
This is not to wide for a fullrace engine?
Kristian J
Last post
...I managed 9000+ equating to a speed of 119mph in the Clan!
That is really phenomenal for a naturally aspirated ~1000cc sports car, IMHO....
16 Replies
4977 Views
Last post by ImpManiac
Thu Aug 19, 2010 9:54 am
Jack Knight 5-sp dogbox
Replies: 2
by
doc knutsen »
Wed Aug 18, 2010 9:03 pm
First post
Does anybody have a sectioned drawing of the Knight 5-speed dog box? I have one of those boxes, built by David Weedon a few years ago, and I am...
Last post
Hi Doc,
My old email address you had still works; pm me for a chat/update.
I have a sectioned JK drawing for the 5 speed somewhere :?
Dave W.
2 Replies
2613 Views
Last post by Impecunious
Wed Aug 18, 2010 10:08 pm
oil sump
Replies: 18
by
Grumpyoldmen »
Tue Aug 03, 2010 10:56 am
First post
Are non-standard (= enlarged) oil sump allowed in historic racing?
Last post
Hi all. Thanks for posting the photos for me Col. This sump holds about the same amount as the usual modified long sump. Most of the additional oil...
18 Replies
4422 Views
Last post by Mike Hanna
Sat Aug 14, 2010 11:58 pm
Clutch Bearing
Replies: 9
by
Bevan IMP »
Tue Aug 03, 2010 8:41 pm
First post
Can anyone advise on the best type of clutch bearing which will fit onto the standard clutch fork.
I am looking for a roller type which will replace...
Last post
the ones in the photo that i have made are nearly the same size as the carbon release bearing just slightly wider in the housing so the fork has to...
9 Replies
3650 Views
Last post by aldrin
Fri Aug 06, 2010 12:09 pm
Gears!!
Replies: 2
by
Grumpyoldmen »
Thu Jul 29, 2010 11:44 am
First post
If J Knight don't make gears anymore. Perhaps Uwe Wulf can do it?
Look at the video where he is making his own gearbox to the Goggo.
Making the...
Last post
JK gears were allegedly made by a guy in Hungary. From his posts on various forums, he appears to be no longer supplying JK because he alleges he...
2 Replies
1806 Views
Last post by Impecunious
Thu Jul 29, 2010 3:40 pm
Jumping out of 3rd gear !!!
Replies: 11
by
apeximp »
Wed Jun 30, 2010 7:50 am
First post
My gearbox is at high revs (6k plus) jumping out of 3rd gear !! its ok in 1st and 2nd and 4th but as i get it under load in 3rd and the revs get up...
Last post
Yep agree with you Noddy, doing engines yourself (even a full race spec) is the best way and I've always done mine even way back in the...
11 Replies
3145 Views
Last post by Lotus-e-Clan
Mon Jul 19, 2010 10:24 pm
Inner drive shafts
Replies: 14
by
bks974c »
Mon Jul 12, 2010 8:32 pm
First post
Only strengthened ones I'm aware of are suitable for lsd's either Quaiffe or ..... (can't think of the company but it will come to me).
The splines...
Last post
Does anyone know if NEW or strengthened ones are available as I have snapped one pulling away?
Many thanks
Hi, I have some new ones here if...
14 Replies
3689 Views
Last post by imporium
Thu Jul 15, 2010 9:06 am
spaceframed chassis rebuild.
Replies: 7
by
speeddemon »
Mon Jun 14, 2010 11:17 pm
First post
For all interested in spaceframes. Since the succesfull test at curborough we have arranged for the engine to be pullled down by Andy Jones of...
Last post
Mike,for the sake of clarity and to keep all your pics in one place,I've posted here as well as the spaceframe thread.
I'd be interested to...
7 Replies
3411 Views
Last post by big J
Wed Jul 14, 2010 11:24 pm
con rod bolt quality
Replies: 6
by
Grumpyoldmen »
Sat Jul 10, 2010 10:24 pm
First post
How often do you use new con rod bolts in your race engine?
Last post
Are the con rods from the early engines (-63) the same as the later (-70)?
I have a set of con rods with good pistons (+ 0.020) that I was going to...
6 Replies
2429 Views
Last post by Grumpyoldmen
Wed Jul 14, 2010 6:40 pm
IMP EVENT at GOODWOOD
by
Colin Valentine »
Thu Jun 24, 2010 5:06 pm
I have seen Forum comments in the past advocating organising a Club Track Day or Test Day at a Motor Circuit.
If anyone is serious about trying to...
0 Replies
1565 Views
Last post by Colin Valentine
Thu Jun 24, 2010 5:06 pm
Bevan tuned mini
Replies: 3
by
#13 »
Thu Jun 03, 2010 8:56 pm
First post
Wanted to share some pictures of my dads old minimp, It was an 850cc bevan tuned imp engine mounted to a mini gearbox, the gearbox was design by my...
Last post
Hi bigj, looking at that picture that is a rawlson kittied imp, my dads was a mason/bevan kit, the front arches on the bevan were more rounded, the...
3 Replies
2401 Views
Last post by #13
Sat Jun 05, 2010 11:59 am
Plastic side windows
Replies: 9
by
ImpManiac »
Fri Apr 09, 2010 5:52 pm
First post
Can anyone confirm how thick competition car side windows need to be when they are replaced with plastic? Is it 4mm or 5mm?
Also, could one of you...
Last post
Thanks chaps. :D
I thought that a simple way of having drop windows in plastic might be to use a knurled knob and an aluminium slot to allow the...
9 Replies
3036 Views
Last post by ImpManiac
Sun Apr 11, 2010 8:55 pm
imp dry sump
Replies: 29
by
edgedj »
Mon Mar 08, 2010 6:08 pm
First post
Hi Folks,
I'm seriously thinking of dry sumping my turbo imp engine, does anyone know of a supplier who can provide a kit to do the job? rough price...
Last post
I can vouch for the quality of Mikes sump I am running one at the moment, after changing over from the Catrol R to Valvolene 20/50 ran it all last...
29 Replies
9383 Views
Last post by Mike Hanna
Tue Mar 16, 2010 8:35 am
Competition transaxle
Replies: 7
by
brakedisc »
Fri Feb 12, 2010 12:26 am
First post
I purchased a pile of Clan competition bits in a job lot from ebay and amongst them was a transaxle stamped SBC 116 on the main case and SBC 104 on...
Last post
Indeed she is. My mate went to their workshop today and Dell was very helpful. Unfortunately Skip Brown marks his modified parts SBE not SBC....
7 Replies
3040 Views
Last post by brakedisc
Wed Feb 17, 2010 5:03 pm
Quaife Gears & LSD
Replies: 5
by
Bevan IMP »
Fri Dec 18, 2009 7:16 pm
First post
Hi
I am currently looking at my gearbox options (Not many). Has anyone any experience with the Quaife gearsets and LSD.
Regards
Jonathan
Last post
Hi,
I got Dave weadon to supply and fit an Quaffe ATB diff in my box and its great did some exceedingly wet races in the winter at Anglesey and put...
5 Replies
2887 Views
Last post by Adrian
Mon Feb 15, 2010 1:15 pm
Imp Racing Colours
Replies: 10
by
MiniChris »
Mon Nov 24, 2008 6:01 pm
First post
What are your favourite colours/livery for a Hillman Imp when racing? Im thinking of doing my car in racing style but know nothing about what colours...
Last post
Cheers Russ. I think I have seen a colour picture of the Imp when Beechey was driving it, but not with him at the wheel, and my vague memory tells me...
10 Replies
9726 Views
Last post by johnh875
Wed Sep 30, 2009 7:50 am
Works Imps
Replies: 3
by
willsrings »
Mon May 04, 2009 1:24 pm
First post
found this which may be of interest to some, some famous names posting and excellent photos
Last post
Great to see you on the Imp Forum, Don.
3 Replies
2987 Views
Last post by Rod
Wed Jul 15, 2009 10:43 am
fraser steel wheels
Replies: 1
by
itsshelby »
Wed Jul 01, 2009 10:27 pm
First post
can any 1 confirm that these r fraser imp wheels
Last post
cant pot pic on here but have pic in wheels and suspention
1 Replies
1587 Views
Last post by itsshelby
Wed Jul 01, 2009 10:28 pm
Internal Return Springs on 40 DCOE Webers
Replies: 13
by
Clive Brown »
Mon Dec 15, 2008 6:37 pm
First post
Forgive me if this is already common knowledge , but I wonder how many of those of you who run 40 DCOEs in competition have removed the internal...
Last post
Once the carbs are off the manifold , it's probably literally a two-minute job per carb . Remove the two screws holding the brass cover plate on the...
13 Replies
3880 Views
Last post by Clive Brown
Wed Dec 17, 2008 2:12 pm
Sport Head Combustion Chamber Volume
by
benwick3 »
Tue Dec 09, 2008 2:30 pm
Sorry I can't give you the volume of a standard sport combustion chamber. However, I would suggest that you look in the tuning section of Millington...
0 Replies
1340 Views
Last post by benwick3
Tue Dec 09, 2008 2:30 pm
0 Replies
1676 Views
Last post by ImpManiac
Fri Nov 28, 2008 1:42 pm
Wheel Studs: Longer ones required
Replies: 4
by
GURNSIMPS »
Fri Oct 31, 2008 3:15 pm
First post
Hi,I have done this conversion to the rear of my imp to space out my superlites,I used mk1 escort group 4 studs which have a slightly thicker end on...
Last post
as well you having to drill out the stud holes in the hubs to suit the bigger spline of the escort studs - depending on the length of that splne you...
4 Replies
2537 Views
Last post by rootes
Mon Nov 03, 2008 12:23 am
mcrae stages 2008 (photo's)
Replies: 14
by
andyb »
Mon Sep 29, 2008 11:07 pm
First post
a couple of photo's of andrew cowans imp from last weekends mcrae stages
photos by ben (pobsport)
friday night at noise test
sat afternoon in...
Last post
A case of Triggers broom , but I would still love to have one :!:
14 Replies
5058 Views
Last post by willsrings
Wed Oct 29, 2008 8:49 pm
Rootes Competition History
Replies: 4
by
Rod »
Fri Jul 25, 2008 1:49 pm
First post
I have mentioned on a number of occasions that someone should write a history of the Rootes Comps. Dept. I emailed well known author Graham Robson...
Last post
Found it, it was actually Mercian Manuals, publishers of the forthcoming book. If anyone is interested www.mercianmanuals.co.uk
4 Replies
2566 Views
Last post by Rod
Tue Jul 29, 2008 9:49 am
Rollcage mounting points?
Replies: 14
by
Lars Hagermark »
Mon Feb 25, 2008 12:50 am
First post
Mounting the backstays on the wheel arches seems to be the way to go. My SD cage is also fitted like that
and can't recall having ever seen it...
Last post
you can still road rally it with a proper cage in safety as a modern rathe than histeric car...
14 Replies
5170 Views
Last post by imull
Fri Mar 21, 2008 8:42 am
10 Replies
4251 Views
Last post by HARTWELL MK1
Tue Mar 18, 2008 8:20 am
Clan sumpguard
Replies: 2
by
Clanman »
Sun Mar 16, 2008 5:39 pm
First post
One for the rally experts-I need a sumpguard for my Clan Crusader. What is the best way/plan/available to do this? :?: Any other advice about...
Last post
Very similar to what I used on my Clan when rallying excepth my piece of dural came via an RAF scrap bin.
Pete Richards
2 Replies
2116 Views
Last post by benwick3
Mon Mar 17, 2008 9:11 am
rodwell motorsport drysump parts
Replies: 7
by
colin rooney »
Thu Mar 06, 2008 6:43 pm
First post
This is a drysump system for imp race engine that stuart at rodwell motorsport is working on if anyone is interested in stuff like this the number...
Last post
Rodwell Engineering
Name: Rodwell Motorsport Engineering
Contact: Stuart Brownsea
Telephone: Tel/ Fax: +44 (0)1305 775451; Mobile: 07712 002578...
7 Replies
4292 Views
Last post by Keith 'Supaimpy' Laming
Mon Mar 10, 2008 11:03 am
Forum permissions
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot post attachments in this forum