forum.theimpclub.co.uk

Hi All, I have a couple of NOS Express bonnet front edge repair panels, for underneath areas if needed £120 ......
photos on my website.... www.malcolmanderson.co.uk Malcolm....

Unable to reply to most email's etc now until Monday August 12th

Hi all, if anyone needs bits or help ? I am here tomorrow working , but not here Saturday, away on a railway course !..... may be about on Sunday, its a big diesel Gala event on the railway, for Jason ... & a beer festival at Washford Stn......& the B3227 goes right past my house to South Molton :D ...

Hi All This is a bit of a longshot but I have a rootes 1 gearbox (early imp?) in the back of a Jomo F3 and apparently it was possible to purchase / make Jomo gears with different ratios for 3rd and 4th. Has anyone made these or have a set for sale? as I'm planning on returning the vehicle to circui...

Philspray wrote:hi does anybody have any grp imp panels they want to sell
many thanks Phil

Hi, I have wider wheelarch's & bib spoilers here in stock if needed ?......see website link below
Malcolm

Hi i can supply competition shoes with the latest Mintex developed material. https://youtu.be/M5Nf3RLo7Uk short test proves the shoes work from cold (i am on drums all round) They have also stood up to Illuminations rally, Devils own, both are/were 100 mile plus night rallies through the Yorkshire ...

Transaxle gear change flexy couplings, later type clutch covers......... .....Malcolm

mikeyhearne wrote:I'll be loaded and on my way without the Nymph about 1ish .
not looking forward to the Severn Bridge in the wind while towing a large caravan
Mikey

the old bridge from M4 is closed at present due to being very Vindaloo windy ! use the newer bridge.....

Wont' be able to make WWW this year (again :( ). It's clashing with a football match that one of my boys is going to as a surprise birthday gift, at Anfield. If anyone is hanging about around Mid Wales (Machynlleth area) for a week, there a car run called Mach Run 18 being held the following weeken...

Dave & Lynda wrote:Postal Booking is now closed - online booking for Imp Club Members is open until 29th July
https://www.theimpclub.co.uk/advance-booking/

Dave PM sent ok

imp wrote:is this still relevant?

Is what relevant from 2015 ?..........3 years ago ! .?

Interesting, I wonder what the originals were that they used then, I've had Rootes, Chrysler and Talbot labelled rear wings and they all fit perfectly, so whether the panel they used to copy had been damaged, eg squashed slightly at some stage so loosing its form, maybe? They were a pair of Rootes ...

Is your friction plate an original part or a refurbished one, did you check theres no play in the rivets holding the splined hub to the centre and friction material to the metal, Im thinking if it is a refurb and they removed the original rivets the holes might be slightly enlarged and theres a bit...

johnnyboy wrote:Hi,
Been busy sorting other stuff out so not been on the site for a while!
Malcolm, thank you for your offer, but after some confusion on the part of email providers, Bob of Imp Club spares has supplied one.

Cheers

John H

No Problem......

johnnyboy wrote:Hi,
Does anyone supply the 930cc variety with the integral housing body?

Cheers

John

John, mine not wanted ? no probs.... please confirm.....thanks Malcolm

johnnyboy wrote:Hi,
Does anyone supply the 930cc variety with the integral housing body?

Cheers

John

Hi John, I can supply you the new 930 housing & special bolts & new pump & gasket for £60 inc p&p.....Malcolm

Hi All, if anyone needs parts taking along to WWW, contact me asap please.... should have a newly remade Sport silencer with me,£170.... newly remade Mark One Ali door catch's £50 pair & newly remade Coupe rear side window seals, but with no slit for metal trim £74 pair ........ Malcolm Van001 Husk...

I think something went wrong with the voting as not one but TWO cars won awards and they weren't even at the event !!! :o :o Tis very true I am told, as good as Noddys Vusky is good, the AA van should have won first prize, in our opinion & others too...... :o .... Van003 Van001 Husky005 Husky002 Hu...

Hi, can anyone tell me who won the 3 van & husky awards we sponsored please, as not able to see or hear all ....

Hmm...that's a bit of a shame. I always like to have a chat with those guys at National, so I guess we'll have to make do with you and your lady wife over the weekend :roll: :wink: Hope there's cider to be imbibed Malc :D In exchange for some of my hard-to-come-by cash for spares, of course ..... A...

Hi, as most will know Ian & Mark Toon, will not be at the National this year & we are also not bringing any repair panels to sell, unless they are pre ordered today , as nearly loaded up now ......same applies to some engine parts, as Ben Boult is also not coming along..... manic Malcolm.... Imp003...

.....Sweat !! & burnt thigh bits a bit on a hot seat

I really like the chrome strips, Dave. :D The console looks good too - and it'd be useful. And good work on the cylinder head. There can't be many NOS ones languishing about these days! IM 8) I have a new bare L4 one here if needed ?.... & a rarer Mark One too.. :lol: ...Malcolm.. Imp006 Imp009 Hus...

Hi Guys, Just joined the club, and I an getting to grips with a Sunbeam Stiletto. I no doubt be on here asking for advice many times,but my first question is ,what are the door seals like? When I got the car the doors wouldn't close ,but I noticed that the previous owner had fitted new door seals,s...

Hopefully......I may get there this year !!!!.....Manic Malcolm....

Yes. The clips are something like £1 each too, so the cost really mounts up. :? The car looks superb! :mrgreen: I have the Chamois trim to refit to my, er, Chamois :? too when the day dawns. I really like it! IM 8) I dont know where you got that price from Paul.. :wink: ..they are only 40 pee each ...

see the issue now more cleanly after i clean it all up ashame as the engine itself now turns over and has great compression wondering if anyone had same issue ? That block is scrap now.....start again with another block or half engine ...a better later one ! I have a few options here if needed ? co...

Just curious, on the Monte Carlo screens with the rather garish silver lines, are they the only heated elements or do they have Ford-like elements running vertically between the silver lines? If the silver lines are the ONLY elements I'd be interested to know how effective it is as there is quite a...

colin rooney wrote:cant remember the thread size but if you give malcolm anderson a ring he should have them in stock

col

Yes & already sent.........

Service kit has arrived - a master cylinder is rebuilt although not the one that came out as its scored to hell - Wilwood one returned to supplier - new master cylinder not fitted . Maybe this week if its lucky i might actually get the Vusky mobile again :) Hi ol Noddy Dave, I got that master cylin...

Someone once said to me if one Will fail a Willwood Would, so I dont know if thats anything to go by? :o Are the Girling ones completely unobtainable now then? I have used an ATE rear brake cylinder when I completely renewed the entire system on one occasion and that was the only one that didnt las...

Having sold over 120 + of Willwoods cyls, no one has ever sent one back as being faulty, leaking or tight seals .....Club spares have'nt either as far as I know ?......only someone naffed up a thread on one......easy done........but tried to blame me !!!.... am keen to see what Noddys is like when r...

Its the same profile as the stainless trim that runs just below window level across the door rear wing and around the bottom of the vinyl roof on the rear pillar on the Stiletto, rectangular section, it is not the half round profile as the waist line on the early IMPs. An passable alternative is th...

Hi, I have been in talks with Express Panels new manager / part owner for 3 months now & things will be IMProving very soon & have now had several pairs of sills from them & are much more helpful than before !! front wheel arch's are in the system for now at least ok........Malcolm Imp003 Imp009 Hu...

They wanted to know what format for the 3D file. I told them obj. The photo below is what they say the model is based around. Is it known in the club? http://paginas.fe.up.pt/~fff/Homepage/Porto/Boav05/Boa_0168.jpg Don't know how close anybody can get to this but anything that can be achieved shoul...

The Nun wrote:You can get a whole new carb for 35 quid from club spares.
You need to be a club member though to take advantage of that facility

Not £35 !!!!.....petrol pumps are £35............ :lol:

bazzateer wrote:Grand Prix is live at 5am Sunday morning I think

Is there a 5am time these days then !!.....

Hi All, anyone needing bits taking to the WWW let me know asap by email or call me..........
we leave here for the Forest of Dean on Weds morning on way to Pandy......
Manic Malcolm

I looked at his site and no mention of rings? Hi Mr Oz, :wink: I dont put everything on the website, as stock changes all the time & only on there if I have a few of .... I do have new good std rings in now for £70 & the rare Mk 1 breather proper breather element £10 one only Regards manic Malcolm ...

Hi Bryan, hope all is going well with the new L4 engine & getting it to the National for your awards..... Cheers Malcolm

Search found 187 matches